Abstract:The 2D nature of MXenes and its ability to assemble into loosely networked structures allow W18O49 NWs/Ti3C2Tx composite based electrochromic electrode to achieves fast transport kinetics and smart structural configuration. High transmittance modulation (61%) and coloring efficiency (139.1 cm2 C−1) in the 15‐layer composite film structure make it attractive for electrochromic applications such smart windows, light shielding, and stealth technology. Electrochromic devices can facilitate the realization of a wide set of future applications, ranging from energy‐saving windows to smart wearables and stealth. Historically, tungsten oxides have been the most studied materials for electrochromism, albeit with bottlenecks like limited conductivity, high charge transport barrier, and low ion diffusivity. Here, inspired by the recent MXene materials, the study has engineered an electrochromic composite of MXene nanosheets (Ti3C2Tx) and W18O49 nanowires (NWs). A transparent conductive electrode is fabricated by co‐assembly of Ag and W18O49NWs, followed by depositing W18O49 NW/Ti3C2Tx layers for the fabrication of the electrochromic device. The incorporation of Ti3C2Tx nanosheets enhances the transport of electrons and ions within the electrochromic layer, leading to a significant improvement in the electrochromic performance. Noteworthily, the film structure comprising 15 layers of W18O49 NW/Ti3C2Tx composite reveals enhanced transmittance modulation (61%), rapid response time (4.5 s coloration, 6.5 s bleaching), and high coloration efficiency (139.1 cm2 C−1). Moreover, the electrode also presents a high diffusion coefficient of Li+ and good cycling stability (96.66% after 250 switching cycles). Finally, a large‐scale (15 × 20 cm2) flexible electrochromic device with a solid electrolyte is successfully fabricated and utilized as a smart window and a flexible stealth patch.

Quasi–symmetric Electrochromic Device with two kinds of Amorphous Tungsten Oxide Films

A Four–layer Solid–state Electrochromic Device

A study of Electrochromic thin films and Devices by Photothermal Deflection Technique

Study and Fabrication of V2O5 in Electrochromic Devices

Electrochromic Device with A Polymer Ionic Conductor

Optical Characterization of the Coloration Process in Electrochromic Amorphous and Crystalline Wo3 Films by Spectroscopic Ellipsometry

Enhanced electrochromism from non-stoichiometric electrodeposited tungsten oxide thin films

Citric Acid Induced W18O49 Electrochromic Films with Enhanced Optical Modulation

Construction of TiO2/WO3/TiO2 double heterojunction films for excellent electrochromic performance

Dual-band Electrochromic Film Based on Mesoporous H-Wo3/o-wo3·h2o/r-tio2 for High Performance Smart Windows

Enhancement of electrochromic properties using nanostructured amorphous tungsten trioxide thin films

Amorphous/crystalline WO 3 dual phase laminated films: Fabrication, characterization and evaluation of their electrochromic performance for smart window applications

Investigation of an Electrochromic Device Based on Ammonium Metatungstate-Iron (II) Chloride Electrochromic Liquid

Magnetron sputtered amorphous tungsten oxide electrochromic film

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Hybrid electrochromic device with Tungsten oxide (WO3-x) and nafion membrane: performance with varying tungsten oxide thickness

Amorphous/ordered porous crystalline stacked WO3 films fabricated by electrodeposition-assisted sol–gel and its application to electrochromic devices

An all-solid-state bistable electrochromic device based on the amorphous WO 3-x nanostructured film

Preparation and properties of all solid-state electrochromic devices based on tungsten oxide nanocomposites

One-dimensional physical model for complementary electrochromic device

Enhanced Transport Kinetics of Electrochromic Devices by W18O49 NW/Ti3C2Tx Composite Films