Abstract:Waste polyethylene is blended and pulverized before adding a crosslinking agent via dry‐blending to produce parts via rotational molding. Polyethylene (PE), including high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE), makes up a significant part of post‐consumer plastics in municipal solid waste, presenting challenges for traditional recycling methods due to a wide range of melt flow properties and poor interfacial adhesion between the different resin, which often leads to low quality products (downcycling). In this study, a method is proposed to modify the molecular structure of post‐consumer PE (rHDPE and rLDPE) and their blends by using a straightforward organic peroxide crosslinking technique with 1 phr of dicumyl peroxide (DCP). Different rHDPE/rLDPE blend weight ratios (0/100, 20/80, 40/60, 50/50, 60/40, 80/20, and 100/0) were prepared using a combination of co‐rotating twin‐screw extrusion and pulverization. The final parts were produced via rotomolding where both the forming and crosslinking processes occurred concurrently. Subsequently, the materials were characterized in terms of chemical, thermal, and mechanical properties. It was found that the tensile strength (228%), tensile modulus (345%), flexural strength (145%), and flexural modulus (251%) increased by crosslinking the 80% wt. rHDPE (x‐rHDPE). Conversely, the gel content increased by 17%, thermal resistance by 37.2%, and the impact strength by 93% with 80% wt. rLDPE (x‐rLDPE). It can be concluded that a balance between the properties occurs as the addition of DCP improved both the interfacial adhesion and melt properties of rHDPE/rLDPE blends. This innovative approach represents a simple and straightforward method to upcycle mixed plastics (PE) streams, especially for rotomolding applications. It also offers promising avenues for sustainable waste management and material reuse.

Upcycling Polyolefin Blends into High-Performance Materials by Exploiting Azidotriazine Chemistry Using Reactive Extrusion

Oxidative Upcycling of Polyolefin Wastes into the Dynamically Cross-Linked Elastomer

A facile alternative strategy of upcycling mixed plastic waste into vitrimers

Upcycling of recycled polyethylene for rotomolding applications via dicumyl peroxide crosslinking

Upcycling of Poly(Lactic Acid) by Reactive Extrusion with Recycled Polycarbonate: Morphological and Mechanical Properties of Blends

From Polyester Plastics to Diverse Monomers via Low-Energy Upcycling

Functionalization and Repurposing of Polypropylene to a Thermoset Polyurethane

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Closed-loop recycling of polyethylene-like materials

i PP/HDPE blends compatibilized by a polyester: An unconventional concept to valuable products

Upcycling of Polyethylene Terephthalate to Continuously Reprocessable Vitrimers through Reactive Extrusion

A facile methodology for side- and up- cycling of HDPE waste via partial creation of unsaturated double bonds

Polymer Up-Cycling by Mangana-Electrocatalytic C(sp 3 )–H Azidation without Directing Groups

Selective Upcycling of Polyolefins into High-Value Nitrogenated Chemicals

Fused Filament Fabrication of a Dynamically Crosslinked Network Derived from Commodity Thermoplastics

Circularity in mixed-plastic chemical recycling enabled by variable rates of polydiketoenamine hydrolysis

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability

Biorenewable and circular polyolefin thermoplastic elastomers

Reprocessability in Engineering Thermosets Achieved through Frontal Ring Opening Metathesis Polymerization

Chemical Open-Loop Recycling of Polyethylene