Abstract:Since the 1960s, it has been a common practice worldwide to pursue a homogeneous distribution of reinforcements within a matrix material, discontinuous metal matrix composites (DMMCs) in particular. Taking an overview of the worldwide activities in DMMC research, despite many favourable attributes such as improved specific strength, stiffness and superior wear resistance, DMMCs with a homogeneous microstructure tend to exhibit a very low room temperature damage tolerance even with a highly ductile matrix material such as aluminium. In this review, a range of uniquely multi-scale hierarchical structures have been successfully designed and fabricated by tailoring reinforcement distribution for DMMCs in order to obtain superior performance. A variety of specific microstructures that were developed in Al, Mg, Cu, Fe, Co and TiAl matrices indicate that there must be adequate plastic regions among the reinforcements to blunt or deflect cracks if one wants to toughen DMMCs. Following this path, aided by theoretical analyses, the most recent success is the design and fabrication of a network distribution of in situ reinforcing TiB whiskers (TiBw) in titanium matrix composites (TMCs), where a tailored three-dimensional (3D) quasi-continuous network microstructure displays significant improvements in mechanical properties. This resolves the brittleness surrounding TMCs fabricated by powder metallurgy. It is the large reinforcement-lean regions that remarkably improve the composite’s ductility by bearing strain, blunting the crack and decreasing the crack-propagation rate. The fracture, strengthening and toughening mechanisms are comprehensively elucidated in order to further understand the advantages of such an inhomogeneous microstructure, and to justify the development of novel techniques to produce such inhomogeneous microstructures. This approach opens up a new horizon of research and applications of DMMCs and can be easily extended to general multi-phase composites with enhanced physical and mechanical properties.

Micro-laminated CoCrFeMnNi−TiN p /CoCrFeMnNi high-entropy alloy matrix composite with bimodal grain structure via multi-material selective laser melting (MM-SLM) additive manufacturing

Micro-laminated CoCrFeMnNi−TiNp/CoCrFeMnNi High-Entropy Alloy Matrix Composite with Bimodal Grain Structure Via Multi-Material Selective Laser Melting (MM-SLM) Additive Manufacturing

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

Selective laser melting of CoCrFeNiMn high entropy alloy powder modified with nano-TiN particles for additive manufacturing and strength enhancement: Process, particle behavior and effects

Selective Laser Melting (SLM) Additively Manufactured CoCrFeNiMn High-Entropy Alloy: Process Optimization, Microscale Mechanical Mechanism, and High-Cycle Fatigue Behavior

Grain Refinement and Localized Amorphization of Additively Manufactured High-Entropy Alloy Matrix Composites Reinforced by Nano Ceramic Particles Via Selective-Laser-melting/remelting

Hot cracking, crystal orientation and compressive strength of an equimolar CoCrFeMnNi high-entropy alloy printed by selective laser melting

In-situ synthesis of CoCrFeMnNi high-entropy alloy by selective laser melting

Fine-structured CoCrFeNiMn high-entropy alloy matrix composite with 12 wt% TiN particle reinforcements via selective laser melting assisted additive manufacturing

Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting

Selective laser melting processing of heterostructured Ti6Al4V/FeCoNiCrMo alloy with superior strength and ductility

Tailored microstructures and strengthening mechanisms in an additively manufactured dual-phase high-entropy alloy via selective laser melting

Superior Strength-Ductility Synergy in Additively Manufactured CoCrFeNi High-Entropy Alloys with Multi-Scale Hierarchical Microstructure

Dynamic mechanical properties and σ precipitates strengthening of a NiCrFeCoMo 0.2 high-entropy alloy additively manufactured by selective laser melting

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

A Bimodal and Heterogeneous Laminate Structure with Alternately Distributed Copper-Base and Nickel-Base Alloys Via Multi-Material Laser Powder Bed Fusion (MM-LPBF) Additive Manufacturing

High-strength AlCoCrFeNi2.1 eutectic high entropy alloy with ultrafine lamella structure via additive manufacturing

Fabrication of Spatially-Variable Heterostructured CoCrFeMnNi High Entropy Alloy by Laser Processing

Microstructure, mechanical and tribological properties of CoCrFeNi high-entropy alloy fabricated by different preparing processes

Selective laser melting of dense and crack-free AlCoCrFeNi<sub>2.1</sub> eutectic high entropy alloy: Synergizing strength and ductility

Additive manufacturing of micro/nano multiphase synergistically reinforced Ti-55Al-7.5Nb with a reticular boundary precipitate via direct laser deposition