Influence of hole diameter on mechanical properties and stability of granite rock surrounding tunnels
Huimin Liu,Xuelong Li,Zhenyu Yu,Yi Tan,Yisong Ding,Deyou Chen,Tao Wang
DOI: https://doi.org/10.1063/5.0154872
IF: 4.6
2023-06-01
Physics of Fluids
Abstract:Nowadays, the development and utilization of more and more engineering construction are closely related to granite. However, many granite rock masses in Qingdao contain natural hole defects, which have a great impact on the mechanical properties of granite. It may even cause instability of surrounding rock and safety accidents. Therefore, in this paper, we discuss the influence of the hole diameter on the mechanical properties and stability of granite rock surrounding tunnels. Uniaxial compression experiments were conducted on granite with different hole diameters, and monitoring was carried out using the acoustic emission system and the XTDIC (Xintuo 3D Digital Image Correlation) three-dimensional–full-field strain-measurement systems. The relationship between the strength, deformation, and hole size of granite was investigated. In addition, using the Yangkou tunnel as the prototype and the PFC2D (Particle Flow Code of 2D) particle-flow–numerical-simulation program, a working tunnel model with different hole sizes was established to simulate the influence of natural hole defect sizes on the stability of rock. The results show that: (1) with an increase in hole diameter, the uniaxial compressive strength and elastic modulus of the granite sample gradually decreased. The brittleness of the granite samples gradually decreased, and the ductility gradually increased. (2) Under the action of axial stress and with an increase in the hole diameter, the sample was more likely to produce a stress concentration around the hole defect, which increased the deformation localization band, development, and expansion, as well as the intersection degree. As a result, granite samples are more likely to develop new cracks. These cracks increase in number and size, reducing the compressive strength of the granite sample. (3) The size of the hole defects significantly affected the damage and mechanical properties of the model surrounding rock. When increasing the hole diameter, the defect area increased and the tensile stress concentration near the hole in the localized rock became more evident. In addition, the stability of the rock surrounding the tunnel was significantly reduced, and its bearing capacity was weakened, leading to easier crack initiation and rock damage.
mechanics,physics, fluids & plasmas