Experimental and numerical study on seismic performance of prefabricated new fly ash foam concrete structure
Yunhong Hao,Hongze Wang,Lida Qin,Hao Sun,Yupeng Zhao,Cha kelehan
DOI: https://doi.org/10.1016/j.soildyn.2024.108462
IF: 4
2024-01-12
Soil Dynamics and Earthquake Engineering
Abstract:In view of the current situation of solid waste resource utilization and the introduction of exterior wall insulation limit policy, this paper proposes a new type of assembled fly ash foam concrete structure for rural areas. After that, a 1:3 scaled specimen model was designed for the proposed static test with three actuators loaded synchronously, and the seismic performance of each floor of the structure was investigated by hysteresis curves, skeleton curves, ductility coefficients, equivalent damping ratios, and stiffness degradation curves, and compared with that of ordinary concrete structures. Finally, ABAQUS was used to establish the structural model with different porosity, and the effects of different porosity on the seismic performance of the structure were determined by comparing the results of tests and finite elements. The results show that the peak load of the assembled new fly ash foam concrete structure model is 84.9 kN, the ultimate displacement is 49.5 mm, the equivalent damping ratio is increased by 24.0 %, and the ductility coefficient is 2.15 compared with that of the ordinary concrete structure, with the increase of the pore rate, the damage location is mainly concentrated from the surface of the specimen to the corners of the doors and windows. The pore rate of 0.101 can simultaneously meet the requirements of structural lighting, economy, and load-bearing capacity. The proposal of an assembled new fly ash foam concrete structure enriches the structural form and lays the foundation for the design and application of this structure in the future.
geosciences, multidisciplinary,engineering, geological