Abstract:Selective conversion of renewable sources is necessary for developing energy generation technology and protecting the environment. Herein, this work reports a one-step controllable synthesis of trimetallic NiCoFe-layered double hydroxides (NiCoFe-LDHs) nanosheets (1.36 nm) for both an efficient oxygen evolution reaction (OER) and highly selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMFOR) into value-added 2,5-furandicarboxylic acid (FDCA). For comparison, two sets of bimetallic NiCo- and NiFe-LDHs were similarly synthesized and evaluated. In the OER process, the optimal NiCoFe-LDHs nanosheets exhibited the lowest necessary overpotential (288 mV) to reach 10 mA cm–2 and the smallest Tafel slope of 92 mV dec–1 compared with NiCo-LDHs (347 mV, 115 mV dec–1) and NiFe-LDHs (303 mV, 108 mV dec–1). The performance was also superior to most previously reported LDHs catalysts. Additionally, NiCoFe-LDHs nanosheets exhibited a much smaller charge transfer resistance (Rct) of 1.0 Ω and a larger Cdl value of 2.62 mF cm–2 compared with NiCo-LDHs (2.1 Ω, 1.94 mF cm–2) and NiFe-LDHs (1.4 Ω, 2.22 mF cm–2), indicating fast catalytic kinetics. Furthermore, the NiCoFe-LDHs nanosheets possessed excellent durability over 10 h, much better than that of NiCo- and NiFe-LDHs. NiCoFe-LDHs catalysts also exhibited high performance in the oxidation of 5-hydroxymethylfurfural (HMF) to FDCA, which is a key precursor for the sustainable synthesis of polymers (e.g., polyethylene 2,5-furandicarboxylate (PEF)). An ultralow overpotential of 280 mV was required to achieve 20 mA cm–2, nearly 120 mV less than the activity in pure 1.0 M NaOH. The reaction intermediates and products were qualified by liquid chromatography–mass spectroscopy system (LC-MS) and LC, where 95.5% conversion of HMF and 84.9% yield of FDCA were obtained in 1 h. The reaction kinetics and possible pathways were further investigated. As a unique report utilizing trimetallic LDHs catalysts for OER and HMFOR, this study provides a promising perspective for energy conversion and electrocatalytic processing of biomass-derived monomers.

Engineering a localized electrostatic environment to enhance hydroxyl activating for electrocatalytic biomass conversion

Heterogeneous interface induced Co3O4-NiO catalyst for efficient electrocatalytic 5-Hydroxymethylfurfural oxidation

Enhanced electrocatalytic biomass oxidation at low voltage by Ni 2+ -O-Pd interfaces

Tuning the adsorption behaviors of non-noble electrocatalysts to boost valorization of 5-hydroxymethylfurfural

Interface Engineering of the NiO/CeO2@NF Heterostructure to Boost the Electro-Oxidation of 5-Hydroxymethylfurfural

Boosting The Electrochemical 5‐Hydroxymethylfurfural Oxidation by Balancing The Competitive Adsorption of Organic And OH− Over Controllable Reconstructed Ni3S2/NiOx

Interface engineering for NiO/CeO2@NF heterostructure to boost the electro-oxidation of 5-hydroxymethylfurfural

Regulating the microenvironment of catalytic sites by atomically precise and charge tunable Au25 nanoclusters for efficient 5-hydroxymethylfurfural electro-oxidation

Enhanced Electrocatalytic Biomass Oxidation at Low Voltage by Ni2+-O-Pd Interfaces

Cross-linked α-Ni(OH) 2 nanosheets with a Ni 3+ -rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Pt-modulated Redox Property and HMF Adsorption Kinetics of Ni(OH)2 for Biomass Upgrading

Weakened Hydrogen Bond Connectivity Promotes Interfacial Mass Transfer for Industrial Level Scalable Biomass Electrooxidation

Heterogeneous Interface Enhanced Adsorption of Organic and Hydroxyl for Biomass Electrooxidation

Activity origin and alkalinity effect of electrocatalytic biomass oxidation on nickel nitride

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni3S2@NiFe-PBA nanocubes

In-situ redispersion of Ni@C catalyst boosts 5-hydroxymethylfurfural electrooxidation by increasing Ni4+ sites

Trimetallic NiCoFe-Layered Double Hydroxides Nanosheets Efficient for Oxygen Evolution and Highly Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni 3 S 2 @NiFe-PBA nanocubes

Charge Transfer Induced by P-N Heterogeneous Interface on Mn3O4-Fe2P/NF to Promote Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Mechanistic Study on Electro-Oxidation of 5-Hydroxymethylfurfural and Water Molecules Via Operando Surface-Enhanced Raman Spectroscopy Coupled with an Fe3+ Probe

Regulating the Electronic Structure of Ni Sites in Ni(OH)2 by Ce Doping and Cu(OH)2 Coupling to Boost 5-Hydroxymethylfurfural Oxidation Performance