Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Experimental Contact Acoustic Nonlinearity of Interfaces During Loading-Unloading Cycle: Combined Effects of Elastoplastic Nonlinear Spring, Crack-Clapping, and Adhesion

On the role of capillary instabilities in the sandcastle effect

Noise activated dissociation of soft elastic contacts

Adhesion of Elastic Wavy Surfaces: Interface Strengthening/weakening and Mode Transition Mechanisms

Acoustoelastic Guided and Surface Waves in Waveguides with Focus on Non-Destructive Testing and Structural Health Monitoring Applications —A Review of Recent Studies

Nonlinear Response of Contact Interface with Nanoscale Fractal Roughness under Harmonic Excitation for Jointed Structures

Nonlinear interaction between ultrasound and solid rough interface

The Influence of Background Ultrasonic Field on the Strength of Adhesive Zones under Dynamic Impact Loads

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Experiments and numerical results on nonlinear vibrations of an impacting hertzian contact. Part 2: random excitation

Complex Variable Formulation for Non-Slipping Plane Strain Contact of Two Elastic Solids in the Presence of Interface Mismatch Eigenstrain

Loading-unloading hysteresis loop of randomly rough adhesive contacts

Numerical Investigation on the Loading-Delamination-unloading Behavior of Adhesive Joints

Intersonic Detachment Surface Waves in Elastomer Frictional Sliding

Frictional contact of soft polymeric shells

Experiments and numerical results on nonlinear vibrations of an impacting hertzian contact. Part 1: harmonic excitation

Interface behaviors of elastic-plastic waves and its impact on uncertainties in vibro-acoustic modulation (VAM) for structural health monitoring (SHM) of bolt loosening

Effect of Mixed Dislocations on Nonlinear Acoustic Responses in Plastic Deformation Materials

Modeling of Ultrasonic Nonlinearities for Dislocation Evolution in Plastically Deformed Materials: Simulation and Experimental Validation.

Nonlinear acoustic characterization of heterogeneous plasticity in bent aluminium samples

Interface Mismatch Eigenstrain of Non-Slipping Contacts Between Dissimilar Elastic Solids