Abstract:This paper presents the results of the fabrication and design of quantum dot solar cells with cathode electrodes based on rGO@Cu2S nanocomposite. This material is made by the hydrothermal method to form a powder, which is then dispersed in the organic compounds polyethylene glycol and polyvinylpyrrolidone to form a paste coating on the FTO conductive substrate by the printing-screen method. Cu2S, rGO, and nanocomposite rGO@Cu2S electrodes with the initial mass of graphene oxide varying at 8 mg, 12 mg, and 16 mg. The composition and structure of the films were determined using EDX mapping, XRD, Raman spectroscopy, and FTIR spectra, confirming that they were successfully fabricated. In addition, the results showed that the surface of the film is very porous, making it suitable for electrode fabrication. The results of measuring the PCE show that the efficiency is effectively improved. The efficiency of the rGO counter electrodes is increased as compared to the Cu2S counter electrodes. The device has the highest efficiency of 5.665%, VOC = 0.48V, JSC = 22.776 mA/cm2, and FF = 0.518 for 12mg-rGO@Cu2S counter electrode. This result shows that the support of the graphene network helps the Cu2S nanoparticles to be distributed more evenly when Cu2S material is directly coated on the FTO. Besides, the graphene network also helps to make the electrons transition to the polysulfidide more flexible, which is proven through cyclic voltammetry and electrochemical impedance spectroscopy results.

rGO@CuSCN bilayer as composite back contact for highly efficient CdTe thin-film solar cells

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

CdTe thin film solar cells with a SnTe buffer layer in back contact

Graphene Oxide Doped Single-Walled Carbon Nanotube Thin Film As Back Electrode for CdTe Solar Cell

Novel Cu Nanowires/Graphene As the Back Contact for Cdte Solar Cells

Impacts of Reduced Graphene Oxide in CdS/CdSe Quantum Dots Co-sensitized Solar Cells

Scalable low-cost CdS nanospheres@graphene nanocomposites counter electrode for high efficiency dye-sensitized solar cells

Interface Engineering For Both Cathode And Anode Enables Low-Cost Highly Efficient Solution-Processed Cdte Nanocrystal Solar Cells

The Effects of ZnTe:Cu Back Contact on the Performance of CdTe Nanocrystal Solar Cells with Inverted Structure.

Promoting Solution-Processed CdTe Nanocrystal Solar Cells Via Rationally Controlled Copper Doping

Cu-doped CdS and its application in CdTe thin film solar cell

Enhanced Performance of CdTe Solar Cells with Sb2Se3 Back Contacts

Promoting solution-processed CdTe nanocrystal solar cells by rationally controlled copper doping

A CuxS/GO composite hole transport layer for photovoltaic performance enhancement on CuInS2 quantum dot-sensitized solar cells

Combinatorial Tuning of Work Function and Optical Properties in CuZnSe Thin Films for Efficient Bifacial CdTe Solar Cells

Reduced Graphene Oxide/CZTSxSe1‐x Composites As a Novel Hole‐Transport Functional Layer in Perovskite Solar Cells

Highly catalytic reduced graphene oxide decorated Cu 2 S counter electrode boosting quantum dot – sensitized solar cell performance

Solution-processed CuSCN/WS2 hole transport layer for enhancing efficiency of organic solar cells

Enriched Semiconducting Single Wall Nanotubes As Back Contact for CdTe Solar Cell.

A hierarchical CoFeS2/reduced graphene oxide composite for highly efficient counter electrodes in dye-sensitized solar cells.

rGO modified R-CeO2/g-C3N4 multi-interface contact S-scheme photocatalyst for efficient CO2 photoreduction