Abstract:Billet production is for the most part completed in a continuous casting machine. To produce a billet of suitable quality, the secondary cooling control system needs to provide an appropriate value of water flow rate. At present, most secondary cooling control methods are based on a heat transfer model for the billet, the accuracy of which can directly impact the cooling effect and further affect its quality. In practice, it is difficult to determine the heat flux at the billet’s boundaries due to the complexity of continuous casting. Therefore, this study focuses on identifying the boundary conditions for the 3D heat transfer model of a billet with a linear coefficient. First, we transform the identification of boundary conditions into an optimization problem, prove the Lipschitz continuity of the cost function of the optimization problem, and obtain the Lipschitz constant. Second, based on the Lipschitz continuity of the cost function, we present a modified hybrid conjugate gradient algorithm (MHCGA) to solve the optimization problem and then prove the global convergence of this MHCGA. Compared with other methods, the results of the simulation experiments clearly show that this MHCGA can reduce running time and iteration number. Third, to eliminate the ill-posedness of the inverse problem for identifying the boundary condition, we combined a regularization method with MHCGA. Simulation experiments confirmed that this method can effectively estimate the boundary conditions. Finally, the experimental data from a steel plant verified the validity of our method, and the prediction results of the shell thickness were confirmed by the nail shooting method.

Estimation of boundary condition of two-dimensional nonlinear PDE with application to continuous casting

Estimation of the boundary condition of a 3D heat transfer equation using a modified hybrid conjugate gradient algorithm

An Approximation for the Boundary Optimal Control Problem of a Heat Equation Defined in a Variable Domain

A numerical method for two-dimensional nonlinear transient inverse heat conduction problems for orthotropic material

Optimal control of three-dimensional unsteady partial differential equations with convection term in continuous casting

Estimating Non-Linear Heat Flux in Continuous Billet Casting Process With Limited Sensors

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Novel Methodologies for Solving the Inverse Unsteady Heat Transfer Problem of Estimating the Boundary Heat Flux in Continuous Casting Molds

A New Solution of Solidification Problems in Continuous Casting Based on Meshless Method.

Finite difference heat-transfer modeling for continuous casting

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Estimation of Unknown Boundary Heat Flux in Laminar Circular Pipe Flow Using Functional Optimization Approach: Effects of Reynolds Number

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

A hybrid collocation method for solving highly nonlinear boundary value problems

Modeling the effect of natural convection on macrosegregation of steel ingot by using a novel method

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Solidification modeling in continuous casting by finite point method

Extended Smoothed Boundary Method for Solving Partial Differential Equations with General Boundary Conditions on Complex Boundaries

Method for Determining the Boundary Condition of Heat Transfer in Mold for Slab Casting

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

A two-dimensional inverse heat conduction problem for simultaneous estimation of heat convection coefficient, fluid temperature and wall temperature on the inner wall of a pipeline