Abstract:Inorganic metal halide perovskite materials have attracted remarkable attention as light harvesters because of their promising optoelectronic merits and photovoltaic features like tunable band gaps, high charge carrier mobilities and greater absorption coefficients. In order to explore new inorganic perovskite materials for use in optoelectronic devices Potassium Tin Chloride (KSnCl3) has been experimentally synthesized using a supersaturated recrystallization technique at ambient conditions. The resultant nanoparticle (NP) specimens were analyzed for optical and structural properties by characteristic available techniques including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and UV visible spectroscopy. Experimental investigations about structure reveals that KSnCl3 crystallizes in orthorhombic phase with particle size of 400-500 nm. SEM showed better crystallization and EDX confirmed the accurate structural composition. UV-Visible analysis indicated a prominent absorption peak at 504 nm, and the band gap is 2.70 eV. Theoretical investigations of KSnCl3 were also carried out via AB-initio calculations in Wein2k simulation program using modified Becke Johnson (mBJ) and generalized gradient approximations (GGA). Optical properties like extinction coefficient k (ω), complex parts of dielectric constant (ε 1, ε 2), reflectivity R (ω), refractive index n (ω), optical conductivity L (ω) and absorption coefficient α (ω) were examined and it was observed that . theoretical investigations were consistent with experimental findings. Incorporation of KSnCl3 as an absorber material along with single walled carbon nanotubes as p-type materials in (AZO/IGZO/KSnCl3/CIGS/SWCNT/Au) solar cell configuration have been investigated by SCAPS-1D simulation package. Open circuit voltage (Voc) of 0.9914 V, short circuit current density (Jsc) of 47.32067 mA/cm2 and a remarkable efficiency of 36.823% with has been predicted. Thermally stable KSnCl3 may become potential source in manufacturing of photovoltaic and optoelectronic applications on large scale.

Optoelectrical properties of the ternary chalcogenide SnSb2S5 as a new absorber layer for photovoltaic application

A study of SnS thin films and its suitability for photovoltaic application based on the existence of persistent photocurrent

Thin Films Of Tin Sulphide For Application In Photovoltaic Solar Cells

Optical, electrical and electronic properties of SnS thin films deposited by sol gel spin coating technique for photovoltaic applications

Microstructure Dependent Physical Properties of Evaporated Tin Sulfide Films

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

SnS Films for Photovoltaic Applications: Physical Investigations on Sprayed SnxSy Films

Influence of deposition potential and substrate characteristics on the photovoltaic conversion efficiency of p-SnS absorbing layers

Studying the Structural, Morphological, Optical, and Electrical Properties of CdS/PbS Thin Films for Photovoltaic Applications

Thin films of tin sulphide for use in thin film solar cell devices

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

On the Structural and Optical Properties of Sns Films Grown by Thermal Evaporation Method

Structural, optical, electrical, and photovoltaic investigations of p-type Cu2MnSnSe4 thin films as a novel absorber layer for thin film solar cells

Single Phase, Large Grain, p-Conductivity-type SnS Layers Produced using the Thermal Evaporation Method

Ultrathin Solar Cells Based on Atomic Layer Deposition of Cubic Versus Orthorhombic Tin Monosulfide

Antimony sulfide thin films in chemically deposited thin film photovoltaic cells

Evaluation of AA-CVD deposited phase pure polymorphs of SnS for thin films solar cells

Ultrasonic spray synthesis, photoelectric properties and photovoltaic performances of chalcogenide CaSnS3

Experimental and numerical investigations on feasibility of inorganic KSnCl3 perovskite absorber and SWCNT-HTL for solar cells

Synthesis and characterisation of co-evaporated tin sulphide thin films