Abstract:Combining exceptional crushing strength of hollow glass microspheres (HGM) with reinforcing properties of carbon nanotubes as well as carbon fibres with epoxy resins results in a design poised to meet the demand for advanced, lightweight and high strength materials required in a variety of industries, such as aerospace and automotive, particularly, in the manufacture of composite rocket motor casings. In this study, unidirectional laminates of HGM/multi-walled CNTs (MWCNTs)/carbon-epoxy (CE) composites (samples nomenclature A–F) of varying wt.% of HGM and constant 0.1 wt.% of MWCNTs by filament winding technique were fabricated and subsequently cured. The HGM (iM16K) was varied as 0.2, 0.4, 0.6, 0.8, 1.0 wt.% by maintaining a constant concentration of 0.1 wt.% of MWCNTs. The hardener, fine hard (FH5200) was utilized in combination with epoxy resin (Epofine 1555). The epoxy resin was heated to 60°C after the fillers were added. Thermogravimetric analysis, differential mechanical analyzer and thermal mechanical analyzer were used to estimate the thermal stability, glass transition temperature and coefficient of thermal expansion (CTE), respectively. HGM and MWCNTs dispersion in the fracture samples caused by transverse tensile loading was examined using scanning electron microscopy. The effect of variation of HGM and 0.1 wt.% constant MWCNTs on tensile and compressive properties in transverse fibre directions of these composites has been investigated. Transverse tensile strength and tensile modulus were improved by 29.07 and 12.33%, respectively, up on the addition of 0.2 wt.% of HGM and 0.1 wt.% of MWCNTs in CE composite. The other findings indicated that > 0.2 wt.% HGM along with constant concentration of MWCNTs had decreasing effect on transverse tensile strength, modulus and compressive strength. The MWCNTs agglomeration was identified as the cause of these mechanical property degradations. The addition of HGM and MWCNTs decreased the CTE of the composite and increased the glass transition temperature as HGM limits the thermal motions of the epoxy polymer chain's molecular segments. The HGM/MWCNTs/CE composite was shown to be thermally stable up to 310°C.

Poly(ether-sulfone)/MWCNT Nanocomposites Manufactured by Powder Metallurgy Route and Their Dynamic Mechanical Properties

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

Structural, Mechanical and Thermal Behaviour of MWCNT-PCS Hybrid Polymer Matrix Nanocomposites: An Extension Study of Graphene-Epoxy Polymer Matrix Nanocomposites

Effect of Multi-Walled Carbon Nanotubes on the Properties of Polyoxymethylene

Static and dynamic mechanical properties of polydimethylsiloxane/carbon nanotube nanocomposites

Polyolefin elastomer/cyclic olefin copolymer/multi‐walled carbon nanotubes nanocomposites: Rheological, morphological, electrical and mechanical study

Experimental investigation of wear of multiwalled carbon nanotube particles-filled poly-ether-ether-ketone matrix composites under dry sliding

Effect of long-length carbon nanotubes on yield, ultimate, dynamic mechanical, and thermal properties of polyamide-6 composites prepared by twin-screw extrusion

High-Performance PEEK/MWCNT Nanocomposites: Combining Enhanced Electrical Conductivity and Nanotube Dispersion

Effects of Chemical Functionalization of MWCNTs on the Structural and Physical Properties of Elastomeric Copolyetherester-based Composite Fibers

Thermosetting polyurethane‐multiwalled carbon nanotube composites: Thermomechanical properties and nanoindentation

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Enhanced physical and mechanical properties of Cu-based nanocomposites with bundled multi-layered carbon nanotubes incorporation: fabrication and comparative analysis via conventional sintering and SPS techniques

Investigation of mechanical properties of multi-walled carbon nanotubes/hollow glass microspheres – carbon fibre-reinforced epoxy composites in transverse fibre directions

Polymer chain conformations in hybrid composites of UHMWPE incorporated by GNP/MWCNT

DYNAMIC RHEOLOGICAL PROPERTIES OF POLYSTYRENE/MULTI-WALLED CARBON NANOTUBES COMPOSITES

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

Rheological behaviors of the multi-wall carbon nanotubes/polyethylene composites prepared by a master batch method