Abstract:The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3‐SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. A series of Mn–Ce–Cox/Ti–C,N catalysts were prepared by the impregnation method, and low‐temperature NH3–SCR was studied. The results show that support modification (Ti–C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn–Ce/TiO2 catalyst, 160–320 °C; Mn–Ce/Ti–C,N catalyst, 140–320 °C). The doping of Co further improves the low‐temperature NH3‐SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 °C. Temperature‐programmed reduction (H2‐TPR) and temperature‐programmed desorption (NH3‐TPD) results showed that Ti–C,N can improve the redox ability but reduces the surface acidity. Co‐doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co‐doping is beneficial to the optimal catalytic activity of Mn–Ce–Co0.05/Ti–C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low‐temperature NH3‐SCR through the ‘fast SCR’ pathway. X‐ray photoelectron spectroscopy results of the highest chemisorbed oxygen (Oα) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir–Hinshelwood (L‐H) and Eley–Rideal (E‐R) mechanisms occurred in the NH3‐SCR reaction over the Mn–Ce–Co0.05/Ti–C,N catalyst. © 2021 Society of Chemical Industry

Tailored activity of Ce–Ni bimetallic modified V2O5/TiO2 catalyst for NH3-SCR with promising wide temperature window

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR

TiO2-modified CeVO4 catalyst for the selective catalytic reduction of NOx with NH3

Effects of Cerium and Vanadium on the Activity and Selectivity of MnOx-TiO2 Catalyst for Low-Temperature NH3-SCR

Improvement in Activity and Alkali Resistance of a Novel V-Ce(SO4)2/Ti Catalyst for Selective Catalytic Reduction of NO with NH3

VxMn(4-x)Mo3Ce3/Ti catalysts for selective catalytic reduction of NO by NH3

Improvement of Ce Nb doping on low-temperature catalytic activity of a VOx-based catalyst for NH 3 –SCR reaction

The Superior Performance of Nb-modified Cu-Ce-Ti Mixed Oxides for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

A Comprehensive Study on Sulfur Tolerance of Niobia Modified CeO2/WO3-TiO2 Catalyst for Low-Temperature NH3-SCR

Promotion effect of Ce and Ta co-doping on the NH3-SCR performance over V2O5/TiO2 catalyst

Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature

Tailored temperature window of MnOx-CeO2 SCR catalyst by addition of acidic metal oxides

Ammonium Ion Enhanced V2O5-WO3/TiO2 Catalysts for Selective Catalytic Reduction with Ammonia

Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia

CeO 2 –WO 3 Mixed Oxides for the Selective Catalytic Reduction of NO X by NH 3 over a Wide Temperature Range

Boosting low-temperature selective catalytic reduction of NO with NH3 of V2O5/TiO2 catalyst via B-doping

Active Vanadium(IV) Species Synthesized at Low-Temperature Facilitate Excellent Performance in Low-Temperature NOx-Catalytic Removal

Highly Dispersed Surface Active Species of Mn/Ce/TiW Catalysts for High Performance at Low Temperature NH3-SCR

Enhancement of low temperature NH3-SCR activity and SO2 & H2O tolerance over VPO-Co/TiO2: Determining roles of acidity via Co doping

Promotional Effect of Ce-Doped V2o5-Wo3/Tio2 with Low Vanadium Loadings for Selective Catalytic Reduction of Nox by Nh3