Abstract:The experiments on the dowel-bearing of neosinocalamus affinis- based bamboo scrimber (NABS), considering the angles between load and fiber direction (LFD) and the dowel diameters, were carried out to investigate the dowel-bearing properties, including its failure modes, dowel-bearing strength, and embedded initial stiffness. Referring to the standard ASTM D5764, a controlled displacement was employed to load till specimen failure during the experiments. Then, the load-displacement curves of all specimens were obtained, and the dowel-bearing strength of NABS was calculated based on the load-displacement curve according to the 5 % bolt diameter offset method, and the embedded initial stiffness was derived from the slope of the elastic region of the load-displacement curve. Through a sorting-out and analysis of the experimental results, the types of damage modes of the specimens transit from brittle failure to plastic failure with the LFD angles increases from 0° to 90°, which is mainly dominated by adhesive layer damage; The dowel-bearing strength of NABS at each LFD angle exhibits stability, the coefficient of variation is between 2.4 % and 10.2 %, and its average for each group was calculated, respectively, which decreases with the increase of bolt diameter; Similar to the dowel-bearing strength, the coefficient of variation of embedded initial stiffness is between 2.2 % and 9.2 %, and its average for each group was also computed individually, which increases with the increase of bolt diameter and decreases with the LFD angles increases from 0° to 90°. Finally, the empirical equations for predicting the dowel-bearing strength of NABS were developed by regression analysis of the experimental data and Hankinson formula, and the equation to predict the embedded initial stiffness under different LFD angles was discussed. The results can benefit to depth understanding of the dowel-type connection and structural design of bamboo scrimber.

Size effect on the compressive properties of neosinocalamus affinis-based bamboo scrimber

Compressive Failure Mechanism of Structural Bamboo Scrimber

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

Local buckling resistance of bamboo scrimber plates in compression

Behavior and strength of rectangular bamboo scrimber columns with shape and slenderness effects

Static and dynamic mechanical behaviors of bamboo scrimber under combined tension-bending

Influence of Specimen Size on the Compressive Strength of Wood

Slenderness Ratio Effect on Eccentric Compression Properties of Parallel Bamboo Strand Lumber Columns

Size-dependent mechanical behaviors of 3D woven composite under high strain-rate compression loads

Size Design and Nonlinear Stress-Strain Relationship of Parallel Bamboo Strand Lumbers in Tension and Compression

Manufacturing and Characterization of Wide-Bundle Bamboo Scrimber: A Comparison with Other Engineered Bamboo Composites

Experimental investigation on the dowel-bearing properties of neosinocalamus affinis-based bamboo scrimber

Effects of Cross-Section Morphology, Vascular Bundle Content and Anisotropy on Compression Failure of Laminated Bamboo Columns

Experimental and theoretical study on axial compression behavior of cold-formed thin-walled steel-bamboo scrimber composite columns

Flexural property of steel reinforced bamboo scrimber composite beam

Influence of slenderness ratio and sectional geometry on the axial compression behavior of original bamboo columns

Shear behaviour of I-shaped steel with bamboo scrimber composite beams

Size Effect on the Compressive Strength of Laminated Bamboo Lumber

Experimental study of bamboo scrimber-filled steel tube columns under axial compression