Abstract:Canada faces a severe housing crisis, coupled with an aging and underutilized building stock. This issue is exacerbated in Eastern provinces like Québec and Ontario, where old unreinforced masonry (URM) buildings are prevalent and vulnerable to natural hazards such as earthquakes, floods, and soil settlements, therefore making their rehabilitation and repurpose projects particularly challenging. To address these issues and facilitate code-compliant building reuse and conversion into housing, this study presents a low-cost and sustainable timber retrofit cladding system for improving the structural response of URM buildings typical of Eastern Canada. The proposed design, devised to accommodate an energy layer as well to improve thermal performance, is tailored to the region's cold climate, low-to-moderate seismicity, and flood/soil settlement patterns, utilizing locally available construction practices and materials. In this paper, which focuses on quantifying mechanical performance alone, full-scale experimental testing of URM walls retrofitted with the proposed timber retrofit solution was conducted under in-plane diagonal compression. The results demonstrate that our novel design effectively delays brittle diagonal shear failures and transitions to more desirable mixed shear sliding mechanisms, significantly enhancing displacement capacity and post-cracking loadbearing performance to achieve ASCE 41–23 life safety (LS) thresholds. In addition to preliminary experimental and numerical data showing the potential for increasing URM thermal performance by over five times using biogenic insulation, the adopted retrofit solution enhances the maximum ultimate displacement of as-built walls under diagonal compression by 68 times on average, and recover 75.9 % of their loadbearing capacity on average after the first relevant was observed. Numerical simulations of tested walls is also conducted based on the Distinct Element Method (DEM), showing satisfactory agreement with experimental studies. Findings support the potential for broader application of our retrofit in the rehabilitation of Canada's existing URM buildings, offering a practical solution to increase housing supply while minimizing environmental impact.

Analytical formulation describing the behaviour of URM walls seismically strengthened using timber strong-backs

Seismic out-of-plane retrofit of URM walls using timber strong-backs

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Bamboo Lightweight Shear Walls: Modeling and Identification of Sheathing-to-Framing Connections for Seismic Response Analysis

Dissipation in Sheathing-to-framing Connections of Light-Frame Timber Shear Walls under Seismic Loads

Timber-Based Strategies for Seismic Collapse Prevention and Energy Performance Improvement in Masonry Buildings

Full‐scale shake‐table tests on two unreinforced masonry cavity‐wall buildings: effect of an innovative timber retrofit

Seismic Performance of Unreinforced Masonry Walls with Various Retrofitting Methods

Title : In-situ out-of-plane testing of as-built and retrofitted unreinforced masonry walls 1

Experimental Evaluation of the In-Plane Stiffness of Timber Diaphragms

Mitigating damages to infill walls under combined in-plane and out-of-plane loadings using a spider web-inspired strengthening strategy: Numerical analyses

Parametric study on the in-plane performance of a steel frame retrofit solution for URM buildings using DEM

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

A low-cost timber cladding system for the sustainable retrofit of masonry buildings: mechanical characterization under diagonal compression

Backbone Model for Confined Masonry Walls for Performance-Based Seismic Design

In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar

A block-based numerical strategy for modeling the dynamic out-of-plane behavior of unreinforced brick masonry walls

Out-of-plane strengthening of URM walls using different fiber-reinforced materials

In-Plane Lateral Response of a Full-Scale Masonry Subassemblage with and without an Inorganic Matrix-Grid Strengthening System

Lightly reinforced concrete walls in formwork blocks for the combined seismic and energy retrofit of masonry structures

Evaluating the Role of Mortar Composition on the Cyclic Behavior of Unreinforced Masonry Shear Walls