Abstract:In the present work, a series of MOF-74 (Ni) materials with narrow micropore channels and abundant unsaturated metal sites was respectively prepared via hydrothermal (HT), condensation reflux (CE), and microwave-assisted (MW) methods. The physicochemical properties of synthesized materials were characterized by powder X-ray diffraction, N2-sorption, field-emission scanning electron microscopy, Fourier-transform infrared (FTIR), thermogravimetric (TG)/TG-FTIR, X-ray photoelectron spectroscopy, UV-vis-near infrared, NH3/CO2-temperature programmed desorption, and in situ diffuse reflectance infrared Fourier transform spectroscopy. Their CO2/N2 adsorption performances were evaluated by isotherm adsorption and dynamic adsorption experiments. We found that the MW is a rapid and facile protocol for the synthesis of MOF-74 (Ni) materials with highly efficient CO2 capture capacity. The well-shaped MW-140 adsorbent with superior CO2 adsorption capacity of 5.22 mmol/g at 25 °C can be obtained within 60 min by the MW process, almost 6 times higher than that of the commercial activated carbon (0.89 mmol/g). Results of dynamic adsorption experiments showed that the MW-140 material possesses the highest CO2 adsorption capacity of 3.37 mmol/g under humid conditions (RH = 90%). Importantly, MW-140 has excellent adsorption stability and recyclability, superior CO2 capture selectivity (CO2/N2 = 31), and appropriate isosteric heat in CO2 adsorption (21-38 kJ/mol), making it a promising and potential material for industrial CO2 capture. Characterization results demonstrated that the high capture capability of MOF-74 (Ni) materials can be attributed to the synergistic effect of abundant narrow micropore channels and rich five-coordinated Ni2+ open metal sites which are beneficial for the trapping of CO2 molecules.

Bimetal NiCo-MOF-74 for highly selective NO capture from flue gas under ambient conditions

Microwave-assisted Synthesis of Bimetallic NiCo-MOF-74 with Enhanced Open Metal Site for Efficient CO2 Capture

Taming Structure and Modulating Carbon Dioxide (CO2) Adsorption Isosteric Heat of Nickel-based Metal Organic Framework (Mof-74(Ni)) for Remarkable CO2 Capture

Designing Multivariate Porphyrin-Based Metal-Organic Frameworks with Ni/Co Dual-Metal Atom Sites for Cooperative NO 2 Capture and NO Retention

Ambient Temperature NO Adsorber Derived from Pyrolysis of Co-MOF(ZIF-67).

A New Microporous Metal-Organic Framework with a Novel Trinuclear Nickel Cluster for Selective CO2 Adsorption

Preparation and Characterization of Co-Modified Bimetallic MOF-74-NiCo as an Efficient Catalyst for Low Temperature CO-SCR

High Performance of the Metal Organic Framework CPO‐27 for Toxic Gas Capture (NO2)

Investigation of highly efficient adsorbent based on Ni-MOF-74 in the separation of CO2 from natural gas

Cobalt oxide with flake-like morphology as efficient passive NOx adsorber

Cu-MOF-74-derived Cu2O/CuO-C nanocomposite as an effective chemiresistive sensor for detection of NO2 at room temperature

Synergistic Nitrogen Binding Sites in a Metal-Organic Framework for Efficient N2/O2 Separation.

Nickel-based metal–organic framework for efficient capture of CF4 with a high CF4/N2 selectivity

Microwave-Assisted Rapid Synthesis of Well-Shaped MOF-74 (Ni) for CO2 Efficient Capture.

An efficient Co-Ni hydrous oxide catalyst for elimination of NO pollutant in semi-enclosed spaces at ambient temperature

Cobalt doped Fe-Mn@CNTs catalysts with highly stability for low-temperature selective catalytic reduction of NOx

Fabrication of bimetallic MOF-74 derived materials for high-efficiency adsorption of iodine

Capture of nitrogen dioxide and conversion to nitric acid in a porous metal–organic framework

Reversible Adsorption of Nitrogen Dioxide Within a Robust Porous Metal–organic Framework

Mixed Metal-Organic Framework with Multiple Binding Sites for Efficient C2 H2 /CO2 Separation

High-efficiency and selective capture of nitric oxide by fluorine-modified carbon nitride: A DFT investigation