Abstract:Adding a reinforced stucco layer to the masonry infill walls is a preferred method for strengthening RC frame system structures with an easy-to-apply method that does not require a long time, is economical, and does not require detailed and extensive workmanship. However, no research has been discovered as a result of the extensive literature review that investigates the effects of masonry-infilled RC frames strengthened with a reinforced stucco layer on the seismic performance of openings that must be due to architectural requirements such as doors, windows, installations, and similar ventilation systems. As a result, an experimental study was planned to investigate the effects of the dimensions and location of the opening in the masonry infill walls on the performance of the strengthening method with the reinforced stucco layer. The applied strengthening method increased the ultimate load capacity, initial stiffness, and energy dissipation capacity values of reinforced concrete frames with masonry infill walls by 83%, 226%, and 62%, respectively, but resulted in a 38% decrease in displacement-ductility ratios. The study found that the openings in the masonry infill walls harm the performance of the strengthening technique by adding a rebar-reinforced stucco layer and decreasing the success level. When the opening size increased, and the opening was located at the corner of the masonry wall, the performance of the applied strengthening technique was negatively affected and decreased. Furthermore, nonlinear numerical analyses of the experiments conducted as part of the study were performed using ABAQUS finite element software. The numerical analysis results were compared to the experimental results. It has been determined whether numerical analysis models are compatible with experimental results.

A double-strut macro-modelling approach for the in-plane analysis of masonry infilled RC frames with openings

Cyclic Response of Infilled RC Frames with Window and Door Openings: Experimental Results and Damage Interpretation

Experimental Study of RC Frames with Window and Door Openings Under Cyclic Loading

Modification of a macro model for RC structural walls with large openings

Dynamic Progressive Collapse Response of Multi-Storey Frame Structures with Masonry Infills

Macro-Modeling of Reinforced Concrete Structural Walls: State-of-the-Art

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Behavior of Reinforced Concrete Structural Walls with Various Opening Locations: Experiments and Macro Model

Elasto-Plastic Analysis Of Reinforced Concrete Shear Wall With Openings Using A Macro Model

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames

Seismic behaviour of masonry infilled hinged steel frames with openings: experimental and numerical studies

Numerical investigation on the effect of infill masonry on lateral behaviour of surrounding RC frame

Study on in-plane/out-of-plane seismic performance of masonry-infilled RC frame with openings and a new type of flexible connection

Shear Behaviour of Reinforced Concrete Structural Walls with Eccentric Openings under Cyclic Loading: Experimental Study

A macro modelling continuum approach with embedded discontinuities for the assessment of masonry arch bridges under earthquake loading

Local infill-frame interaction under seismic loads: Investigation through refined micro-modeling

Explicit Approach for the In-Plane Cyclic Behaviors of Unreinforced Masonry Structures Using Finite Particle Method

Experimental and numerical investigation of hysteretic earthquake behavior of masonry infilled RC frames with opening strengthened by adding rebar-reinforced stucco

Discrete macro - models of nonlinear interlocking mechanisms in the out-of-plane failure of masonry walls

Influence of Masonry Infill Walls on the Seismic Assessment of Non-Seismically Designed RC Framed Structures