Abstract:Q960E is a low alloy ultra-high strength steel manufactured by quenching and tempering processes. Solid-state phase transformation (SSPT) and softening effect (SE) may have significant influences on the magnitude and distribution of residual stresses in a Q960 steel welded joint. In order to investigate the feature of residual stress distribution of Q960E steel welded joint, a single-pass joint was fabricated by no-filler tungsten inert gas welding process in this study. The residual stress distribution on the top surface of the joint were measured by strain-gauge method, and the microstructure of the joint was observed by scanning electron microscope. Meanwhile, an advanced computational approach based on MSC. Marc software was developed using an SH-CCT diagram, to accurately simulate temperature field and residual stress distribution of Q960E steel joint. In the developed computational approach, both the SSPT and SE are carefully considered. The simulation results show that the SSPT has a significant effect on the magnitude and distribution of longitudinal and transverse residual stresses in the Q960E steel joint, and the SE can reduce the peak value of longitudinal residual stress in the softened zone by 15 %. The research results also indicate that the phase volume fractions of re-melting zone can be accurately reproduced when the SH-CCT diagram is artificially modified according to the microstructure obtained by experimental observation. This study also suggests that the SH-CCT diagram of the re-melting zone needs to be obtained by experimental method if the microstructure of this zone is to be accurately predicted. In future study, the characteristics of SSPT of the inter-critically heat-affected zone of Q960E steel joint and its influence on residual stress also need to be carefully investigated.

Prediction of phase volume fraction and residual stress distribution in Q960E steel single-pass re-melting joint

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

FE analysis of residual stress and welding deformation of a low-alloy UHS quenched steel fillet joint

Accurate evaluation on residual stress considering solid-state phase transformation and initial stress in thick weld

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Investigation on residual stress of EQ56 high strength steel butt weld

Prediction of HAZ Microstructure and Hardness for Q960E Joints Welded by Triple-Wire GMAW Based on Thermal and Numerical Simulation

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Numerical Simulation of Temperature Evolution, Solid Phase Transformation, and Residual Stress Distribution during Multi-Pass Welding Process of EH36 Marine Steel

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Finite element and experiment analysis of welding residual stress in S355J2 steel considering the bainite transformation

Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation

Multiphysics Study of Thermal Profiles and Residual Stress in Welding

Effect of Solid-State Phase Transformation and Transverse Restraint on Residual Stress Distribution in Laser–Arc Hybrid Welding Joint of Q345 Steel

Experimental and Numerical Study of Membrane Residual Stress in Q690 High-Strength Steel Welded Box Section Compressed Member

Influence of Accelerated Cooling Condition on Welding Thermal Cycle, Residual Stress, and Deformation in SM490A Steel ESW Joint

Investigation of Residual Stress in Butt-Welded Plates Considering Phase Transformation

Solid phase transformation effects on stress and strain in the thick plate EH40 welded butt joint