Abstract:Developing new materials to be applied in extreme environments is an opportunity and a challenge for the future. High entropy alloys are new materials that seem promising approaches to work in nuclear fusion reactors. In this work, FeTaTiVW high entropy alloys were developed and characterized with Molecular Dynamic and Hybrid Molecular Dynamic Monte Carlo simulations. The simulation results show that phase separation originates a lower potential energy per atom and a high level of segregation compared to those of a uniform solid solution. Moreover, the experimental diffractogram of the milled powder shows the formation of a body-centred cubic-type structure and the presence of TiO2. In addition, the microstructure of the consolidated material evidenced three phases: W-rich, Ti-rich, and a phase with all the elements. This phase separation observed in the microstructure agrees with the Hybrid Molecular Dynamic Monte Carlo simulation. Moreover, the consolidated material's thermal conductivity and specific heat are almost constant from 25 °C to 1000 °C, and linear expansion increases with increasing temperature. On the other hand, specific heat and thermal expansion values are in between CuCrZr and W values (materials chosen for the reactor walls). The FeTaTiVW high entropy alloy evidences a ductile behaviour at 1000 °C. Therefore, the promising thermal properties of this system can be attributed to the multiple phases and systems with different compositions of the same elements, which is exciting for future developments.

What problem does this paper attempt to address?

The paper aims to address the issues of material application in nuclear reactors, particularly the performance challenges in extreme environments. Specifically, the paper investigates the simulation, structure, thermal, and mechanical properties of a high entropy alloy (HEA) named FeTaTiVW. ### Research Background Currently, tungsten (W) is selected as a material for plasma-facing components (such as diverters) due to its high melting point, low sputtering yield, and low tritium retention characteristics. However, tungsten has a relatively high ductile-to-brittle transition temperature (DBTT), which limits its application. Additionally, while CuCrZr alloy is used as a heat sink material to absorb the heat from plasma components, it becomes brittle under irradiation and has a relatively low allowable service temperature. Therefore, an intermediate layer material is needed to ensure proper thermal transfer between the two while maintaining their operating temperatures within suitable ranges. ### Advantages of High Entropy Alloys High entropy alloys, as a new type of material, contain five or more elements and have a single-phase microstructure, such as face-centered cubic (fcc), body-centered cubic (bcc), or hexagonal close-packed (hcp). Due to their high mixing entropy, these alloys exhibit superior physical and mechanical properties compared to traditional alloys. The paper studies the FeTaTiVW high entropy alloy using a combination of molecular dynamics (MD) and Monte Carlo (MC) simulation methods to evaluate its potential application value. ### Main Findings 1. **Phase Separation and Titanium Enrichment**: The MD and MC hybrid simulations revealed that the alloy undergoes phase separation, particularly with titanium enrichment, leading to a reduction in average atomic potential energy. 2. **Experimental Results**: X-ray diffraction (XRD) results showed the formation of a body-centered cubic (bcc) structure and the presence of TiO₂. Scanning electron microscope (SEM) observations indicated that the alloy powder consists of small aggregates with no apparent porosity. 3. **Thermal and Mechanical Properties**: The alloy exhibited nearly constant thermal conductivity and specific heat capacity in the range of 25°C to 1000°C, and linear expansion increased with temperature. These properties are intermediate between CuCrZr and W, indicating good thermal stability. 4. **Microstructure**: After annealing, the alloy displayed three distinct phases: a W-rich phase, a Ti-rich phase, and a phase containing all elements but with lower Ti and W content. In summary, the FeTaTiVW high entropy alloy demonstrates excellent thermal and mechanical properties due to its multiphase nature and diverse composition, providing a potential new material choice for future applications in nuclear reactors.

Simulation, Structural, Thermal and Mechanical Properties of the FeTiTaVW High Entropy Alloy

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Investigation of the Micromechanical Behavior of a Ti68Nb7Ta3Zr4Mo18 (at.%) High-Entropy Alloy

Radiation behaviour of high-entropy alloys for fusion reactor environments

Investigation of a novel CuFeNiTiV high entropy alloy on phase component, microstructure and mechanical properties

Studies on the design and properties of FeCrVTix medium-entropy alloys for potential nuclear applications

Preliminary exploration of a WTaVTiCr high-entropy alloy as a plasma-facing material

Influence of W, Mo and Ti trace elements on the phase separation in Al8Co17Cr17Cu8Fe17Ni33 based high entropy alloy

Design and development of low density, high strength ZrNbAlVTi high entropy alloy for high temperature applications

Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys

Theory-guided design of high-strength, high-melting point, ductile, low-density, single-phase BCC high entropy alloys

Microstructure and Mechanical Properties of WTaVCrTi Refractory High-Entropy Alloy by Vacuum Levitation Melting for Fusion Applications

First-principles study of the energetics and the local chemical ordering of tungsten-based alloys

Excellent strength-ductility synergy in a novel single-phase equiatomic CoFeNiTiV high entropy alloy

Theoretical study of mechanical and thermodynamic properties of W–Fe alloys: Promising ultra-high temperature alloy materials

Mechanical and thermal behaviors of Ti36-Al16-V16-Fe16-Cr16 high entropy alloys fabricated by spark plasma sintering: An advanced material for high temperature/strength applications

Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization

Promoted room-temperature deformability and high-temperature strength synergy through zig-zag faceted interface design in TiNbTaWC 0.7 eutectic refractory high-entropy alloy

Evolution of microstructure and mechanical characteristics of (CrFeNiCu)100–xTix high-entropy alloys

The Stability and Elasticity in Ta-Ti-V Medium-Entropy Alloys Using First-Principles Calculations

Microstructural evolution, strengthening and high thermal conductivity mechanisms of FeCrV-based medium-entropy alloys with Laves phase precipitation formed by adding minimal Ti