Abstract:InAs1-xSbx is a unique semiconductor as it possesses the lowest bandgap (Eg) of the conventional III–V materials, yielding emission out to nearly 15 μm at room temperature. As such, it is well-suited as the absorber material in long-wavelength infrared (IR) applications such as chemical sensing and large format IR imaging. However, the compositions at the longest wavelengths are significantly lattice-mismatched to conventional substrates. Overcoming this lattice-mismatch requires using thick graded buffers, and to date, little work has focused on the effect of growth conditions on the Sb-incorporation or optical quality of the longest-wavelength InAs1-xSbx materials. Here, the authors investigate the molecular beam epitaxy (MBE) growth of this potential absorber material by using solid source MBE to grow InAs1-xSbx on step-graded buffers on GaSb substrates. The authors have achieved cap-layer compositions as high as x ≈ 0.55 under various substrate temperatures (Tsub) and V/III beam equivalent pressure ratios. By using InAs1-xSbx as the grading material as well as the cap material, the authors can measure Sb-content as a function of growth conditions over many compositions. The author's results show good agreement between x and Eg compared with previous reports, obtaining T = 8 K photoluminescence (PL) emission approaching 11 μm. However, the authors also found that Sb-incorporation falls off for x > 0.2 and worsens with increasing Tsub, suggesting that Sb-incorporation rates increase with reduced adatom mobility. Additionally, the PL of the samples show improved intensity when either Tsub or V/III were increased, while cross-sectional transmission electron microscopy revealed a significant decrease in threading dislocation density with increased V/III. Ultimately, the authors found that under the proper growth conditions, optically active InAs1-xSbx with x over 0.55 can be attained, and with an optimized grading structure, could be a low-cost alternative to HgCdTe for long-wavelength infrared optoelectronics.

Magneto-optical properties of InSb for infrared spectral filtering

Magneto‐Optical Properties of InSb Semiconductor Heterostructures

Magnesium-doped InSbN P-N Junctions for Infrared Photodetection

Optical properties of InSb derived from reflection electron energy loss spectroscopy spectrum

Interband Magneto-Spectroscopy in Insb Square and Parabolic Quantum Wells

InSb/Ti2O3 pn heterojunctions: optoelectronic properties and NIR photovoltaic response

Electrical & optical properties of Mg-doped narrow band-gap InSbN p-n junction

Exploration of the inherent magnetoresistance in InSb thin films

Bandgap Engineering of InSb by N Incorporation by Metal-Organic Chemical Vapor Deposition

Ferromagnetism induced by hybridization of Fe 3d orbitals with ligand InSb bands in n-type ferromagnetic semiconductor (In,Fe)Sb

InSb Nanowire Field-Effect Transistors and Quantum-Dot Devices

Highly Sensitive InSb Nanosheets Infrared Photodetector Passivated by Ferroelectric Polymer

Magneto-optical nonreciprocity without chirality: Archimedean spirals on InSb

Dilute antimonide nitride for long wavelength infrared photodetection

Electronic and optical properties of InAs/InAs$_{0.625}$Sb$_{0.375}$ superlattices and their application to far-infrared detectors

Sb-incorporation in MBE-grown metamorphic InAsSb for long-wavelength infrared applications

Narrow Band Gap InSbN Films Fabricated by Two-Step Ion-Implantation for Long Wavelength Infrared Photodetection

Interplay of spin and orbital magnetogyrotropic photogalvanic effects in InSb/AlInSb quantum well structures

Narrow-gap semiconducting behavior in antiferromagnetic Eu$_{11}$InSb$_9$

Nonlinear Optical Parameters for InSb at 10.6μm Using Microsecond Pulses

Probing the Semiconductor to Semimetal Transition in InAs/GaSb Double Quantum Wells by Magneto-Infrared Spectroscopy