Abstract:The precise determination of the energy scale is a key part of experiments in astroparticle physics. At the Pierre Auger Observatory, the energy scale is set by the calorimetric measurement of extensive air showers with fluorescence detectors. Thus, the absolute end-to-end calibration of the fluorescence detectors is of utmost importance. In the past, this calibration was performed by illuminating the whole optical system of a fluorescence telescope with a large-scale extended uniform light source of the same diameter as the telescope aperture. However, handling difficulties, excessive manpower requirements, and degradation of such a source led to the need for a different approach for the absolute end-to-end calibration. The fundamental idea of the novel approach is to significantly reduce the geometrical size of the calibration light source, which is a near-UV LED source implemented in a portable integrating sphere with specifically designed interior. This light source is moved over the aperture by a rail mechanism with two independent linear stages named the XY-Scanner. Calibration data are evaluated from a series of light source positions instead of illuminating the entire aperture at once. The absolute photometric determination of the light source emission intensity is performed in a dedicated laboratory setup with a measurement uncertainty of 3.5 %. The XY-Scanner mechanics installed at the aperture gives also the opportunity to install other, devices for instance a narrow, collimated beam source to investigate local impurities of the telescopes. This contribution gives an overview of this novel XY-Scanner calibration method and presents preliminary results and discusses plans for the future.

A Scintillation Amplitude−Coordinate Spectrometer

Calibration of a Shower Lead-Scintillation Spectrometer by Cosmic Radiation

Calibration of The Extended Quadrahedral NaI(Tl) Spectrometer by Cosmic Muons

Design and performance evaluation of a compact thermal and fast neutron spectrometer

High Energy X-ray Compton Spectroscopy Via Iterative Reconstruction

A high precision flat crystal spectrometer compatible for ultra-high vacuum light source

Position Reconstruction in a Dual Phase Xenon Scintillation Detector

Thin Scintillation Counters in Particle Detectors

Spectral and timing calibration of eXTP-SFA engineering model in 100XF

Design of a Compact Neutron Spectrometer Using the CLYC Scintillator

Measurement of Time Resolution of Scintillation Detectors with EQR-15 Silicon Photodetectors for the Time-of-Flight Neutron Detector of the BM@N Experiment

Configuration and Calibration of a Flat Field Grating Spectrometer in the Wavelength Range 7–60 Å with a Manson Ultrasoft X-Ray Source

Compact Spatially Modulated Fourier Transform Spectrometer

Performance study and calibration strategy of the HADES scintillator TOF Wall with fast digital readout

A High-Performance Spectrometer with Two Spectral Channels Sharing the Same BSI-CMOS Detector.

Characterization of the Energy Calibration and Resolution of Ej301 Liquid Scintillator

High-resolution, flat-field, plane-grating, f/10 spectrograph with off-axis parabolic mirrors

The XY-Scanner for Absolute End-to-End Calibration of Fluorescence Detectors

A portable high-resolution soft x-ray and extreme ultraviolet spectrometer designed for the Shanghai EBIT and the Shanghai low energy EBITs.

Calibration and Testing of Small High-Resolution Transition Edge Sensor Microcalorimeters with Optical Photons