Abstract:Corrosion is a major concern in transmission pipelines that transport captured CO2. While dry CO2 is noncorrosive, significant corrosion has been reported in dense phase CO2 with trace amounts of water and impurities such as O2, H2S, SOx, and NOx. The aim of this work is to improve our understanding of the physicochemical aspects on the corrosion of carbon steels in the high-pressure environments associated with CO2 transmission pipelines. The effect of flow on the corrosion of X65 carbon steel was investigated in a series of autoclave tests with different combinations of impurity concentrations in supercritical CO2 condition (8 MPa and 35°C). The corrosion rate of specimens was determined by weight loss measurements. The surface morphology and composition of the corrosion product layers were characterized using surface analytical techniques (SEM, EDS and Raman microscopy). Localized corrosion was measured via surface profilometry after corrosion products were removed. Results showed that no corrosion was observed in the supercritical CO2 with 650 ppmv of water, 50 ppmv SO2, and 100 ppmv NO, but corrosion occurred when SO2 concentration was increased to 4500 ppmv and 40,000 ppmv of O2 was added to the system. The presence of flow significantly accelerated the corrosion of carbon steel. Furthermore, localized corrosion was observed in the presence of both O2 and flow.

Atomic-Scale Insights into Flow-Accelerated Corrosion of Carbon Steel

Effect of turbulent flow on the oxide properties of carbon steel in alkaline water

Microstructural Understanding of Flow Accelerated Corrosion of SA106B Carbon Steel in High-Temperature Water with Different Flow Velocities

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

High‐Temperature Oxidation of 60si2mn Spring Steel in Dry Air and Wet Air: Insights from an Experimental and First‐Principles Study

Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen

Effect of Flow on the Corrosion Behavior of Pipeline Steel in Supercritical CO2 Environments with Impurities

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

Microstructural understanding of the oxidation of an austenitic stainless steel in high-temperature steam through advanced characterization

Mechanistic insights of dissolution and mechanical breakdown of FeCO3 corrosion films

The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO2

Surface Characterization and Erosion–Corrosion Behavior of Q235 Steel in Dynamic Flow

Localized corrosion of low-carbon steel at the nanoscale

Effects of flow velocity on the corrosion behaviour of super 13Cr stainless steel in ultra-HTHP CO2–H2S coexistence environment

Flow-Accelerated Corrosion Damage in a Steam Pipe Girth Weld

A Study of Accelerated Corrosion of Stainless Steels under Highly Oxidizing Conditions

Effect of Flow Rate on the Corrosion Behavior of P110 Steel in High-Ca2+ and High-Cl− Environment

Atomistic Insights into the Deposition of Corrosion Products on the Surfaces of Steels and Passivation Films

Decoupling the role of microstructure and geometric discontinuity introduced by weld reinforcement height on corrosion behavior of SA106B/316L SS welded joint in the flowing 0.5 M NaCl solution

Modelling and Analysis of the Corrosion Characteristics of Ferritic-Martensitic Steels in Supercritical Water

Atomic insight into iron corrosion exposed to supercritical water environment with an improved Fe-H2O reactive force field