Application of Ti3C2Tx in a C band Er-doped fiber laser

Cheng Lu,Shuo Sun,Weiyu Fan,Yunao Han,Shuaimeng Li,Guomei Wang,Wenfei Zhang,Caixun Bai,Jinhua Ding,Huanian Zhang,Shenggui Fu
DOI: https://doi.org/10.1016/j.optlastec.2023.109455
IF: 4.939
2023-08-01
Optics & Laser Technology
Abstract:Ti3C2 is the first successfully exfoliated MXene with outstanding optoelectronic properties. In this work, prepared by the aqueous acid etching method with HF and Ti3AlC2, the Ti3C2Tx (Tx represents the surface functional groups) powder is obtained successfully. Further, Ti3C2Tx nanosheets are prepared by the liquid-phase exfoliation method. The nonlinear saturable absorption properties of the homemade 2D Ti3C2Tx SA are explored first. After that, based on the home-made Ti3C2Tx SA, both Q-switched pulses, conventional soliton pulses, and soliton molecule pulses are recorded through an Er-doped fiber laser. The minimum pulse width of the Q-switched operation is 1.95 μs, and the maximum single pulse energy is about 46.52 nJ. The repetition rate has an adjustable range from 48.27 kHz to 90.52 kHz. By changing the polarization state of the cavity, conventional soliton can be observed under a low pump threshold of 37 mW. The optical spectrum has a 3 dB bandwidth of 4.69 nm, corresponding to the pulse width of about 1.28 ps. The soliton molecule outputs can be obtained when the pump power is over 220 mW, and the repetition rate is 19.63 MHz. Both Q-switched and mode-locked operations have good stability with the SNR of 43 dB and 78 dB, respectively. This work indicates that Ti3C2Tx has good nonlinear properties and great potential in the application of ultrafast optical modulators.
optics,physics, applied
What problem does this paper attempt to address?