Abstract:This work reports on the improved Q-switched and mode-locked performances of black titanium dioxide (BTiO2-x) nanoparticles embedded in thin-film composite material as a saturable absorber compared to TiO2 in an erbium-doped fiber laser. The thin-film saturable absorbers were prepared by mixing the nanoparticles with polyvinyl alcohol (PVA) as a host. BTiO2-x has a better nonlinear absorption coefficient, β of -12.46 x 10-7 m/W compared to -7.15x 10-7 m/W for TIO2 determined using z-scan measurement. The laser performance was evaluated in the 85.21 mW – 126.48 mW pump power range. Upon inserting TiO2 and BTiO2-x SA in a laser cavity, the peaks of the output spectrum shifted from 1566.62 nm to 1563.24 nm and 1565.75 nm, respectively. Regarding Q-switched performances, BTiO2-x SA generates a shorter pulse width of 16.00 μs than TiO2 SA. The slope efficiency of the TiO2 SA was 11.72 %, which is higher than the slope efficiency of the BTiO2-x SA. The maximum average and peak power generated by the BTiO2-x SA were 55.67 % and 54.83 % higher than the TiO2 SA. As for mode-locked outputs, BTiO2-x SA can generate pulsed laser at a low threshold power of 62.29 mW compared to TiO2 SA. Furthermore, BTiO2-x SA produced a shorter pulse width of 5.04 ps, whereas TiO2 is 9.20 ps. This study demonstrates that BTiO2-x SA has the potential to produce ultrashort pulse width using the mode-locked technique.

Titanium Disulfide Based Saturable Absorber for Generating Passively Mode-Locked and Q-Switched Ultra-Fast Fiber Lasers

Passive mode-locked Er-doped fiber laser pulse generation based on titanium disulfide saturable absorber

TiS2 As a Novel Saturable Absorber for a 1645 Nm Passively Q-switched Laser

Passively generated Q-switched pulses fiber laser in 2μm wavelength using MXene Ti 3 C 2 T x and Ti 2 CT x saturable absorber

Ultrafast saturable absorption in TiS<sub>2</sub>induced by non-equilibrium electrons and the generation of a femtosecond mode-locked laser

Ultrafast saturable absorption in TiS 2 induced by non-equilibrium electrons and the generation of a femtosecond mode-locked laser.

Passively Q-switched erbium-doped fiber laser based on Ti3C2Tx saturable absorber

Few-layer TaSe2 As a Saturable Absorber for Passively Q-switched Erbium-Doped Fiber Lasers

Passively Q-switched and mode-locking fiber laser based on Sb2S3 saturable absorber

SiO2 passivated TaS2 saturable absorber mirrors for the ultrafast pulse generation

1.06 μm Q-switched ytterbium-doped fiber laser using few-layer topological insulator Bi2Se3 as a saturable absorber

Generation of Q-switched and mode-locked pulses in erbium-doped fiber ring laser using saturable absorption of Ti 2 SnC

Ti<sub>2</sub>CT<sub>x</sub> MXene as a Saturable Absorber for Passively Q-Switched Solid-State Lasers

Bimetallic solid solution MAX phase Ti 2 NbAlC 2 as saturable absorber for passively Q-switched Er 3+ -doped fiber laser

Ti 2 CT X (T=O, OH or F) Nanosheets As New Broadband Saturable Absorber for Ultrafast Photonics

Superior Performances of Q-Switched and Mode-Locked Erbium-doped Fiber Laser using Black Titanium Dioxide Thin-film Saturable Absorbers

A femtosecond pulse erbium fiber laser incorporating a saturable absorber based on bulk-structured Bi2Te3 topological insulator

High-energy Q switched Yb-doped fiber laser based on a ternary layered structured Ti2AlC saturable absorber

A practical topological insulator saturable absorber for mode-locked fiber laser

Mode-locked thulium-doped fiber laser using a stretched few-mode fiber as a saturable absorber

Mid-infrared ultra-short mode-locked fiber laser utilizing topological insulator Bi2Te3 nano-sheets as the saturable absorber