Abstract:This paper presents the influence of zinc on the cross-linking process, mechanical and dynamic properties, morphologies and balance of thermal degradation of blends containing chloroprene rubber (CR) and butadiene rubber (BR). The novel aspect of this research is a comprehensive approach presenting a new curing agent for the CR/BR blends to increase their cross-linking density and final properties, including non-flammability and low fire hazard. This is due to the need to find an alternative to zinc oxide, which is the standard curing agent for chloroprene rubber. The regulations of the European Union enforce a significant limitation on the use of this compound in elastomer technology, due to its harmful effect on aquatic organisms. In this paper, the CR/BR composites were cured with zinc and filled with natural silica fillers (sillitin or chalcedonite) or synthetic silica filler (aerosil). The investigation focused on the morphology characterization of the obtained compounds, their cross-linking degree, swelling, mechanical and dynamic properties, fire hazard and toxicity. The structure of cured CR/BR blends was characterized via scanning electron microscopy (SEM). The fire resistance studies were performed using cone calorimetry or oxygen index methods, whereas toxicity tests were performed with the use of the FB-FTIR (fluidized bed reactor coupled with FTIR analyzer) method. The results showed that obtained CR/BR products were characterized by satisfactory final properties. The properties determined by the oxygen index and cone calorimetry methods, including the behaviors of the tested CR/BR vulcanizates in fire conditions, showed that the produced compounds were characterized by a low fire hazard and can be classified as non-combustible rubber products. However, the toxicity of the decomposition products, determined at 450, 550 and 750 °C, was very high.

Thermal Stability and Flammability of Styrene-Butadiene Rubber-Based (SBR) Ceramifiable Composites

Effect of Silicone Oil on Properties and Performance of Ceramizable Styrene-Butadiene Rubber-Based Composites

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Investigation of the thermal degradation kinetics of ceramifiable silicone rubber-based composite

The Morphology, Mechanical and Dynamic Properties, Fire Hazard and Toxicity of Chloroprene and Butadiene Rubber Composites Cross-Linked with Zinc

Improved Thermal Insulation and Mechanical Strength of Styrene-Butadiene Rubber through the Combination of Filled Silica Aerogels and Modified Glass Fiber

Cross-Linking Characteristics, Morphology, Dynamics, and Mechanical and Thermal Properties of Polychloroprene/Polybutadiene/Nano-Zinc (CR/BR/nZn) Compositions with Reduced Fire Hazard

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Mesoporous Spherical Silica Filler Prepared from Coal Gasification Fine Slag for Styrene Butadiene Rubber Reinforcement and Promoting Vulcanization

Ceramifiable Flame-Retarded Silicone Rubber Composites Based on Novel Phosphorus/Nitrogen/Silicon-Containing Flame Retardants

Thermal Decomposition and Ceramifying Process of Ceramifiable Silicone Rubber Composite with Hydrated Zinc Borate

Flame retardancy, combustion, and ceramization behavior of ceramifiable flame‐retardant room temperature vulcanized silicone rubber foam

Effects of Basalt and Carbon Fillers on Fire Hazard, Thermal, and Mechanical Properties of EPDM Rubber Composites

Research on SR/Frit Composites: A Novel Low-Temperature Ceramifiable Expandable Flame-Retardant Material

MICROSTRUCTURE EVOLUTION OF SILICONE RUBBER-BASED COMPOSITES DURING CERAMIZATION IN DIFFERENT CONDITIONS

Synergistic Effects of Cerium(iv) Phosphate with Intumescent Flame Retardant in Styrene Butadiene Rubber

Influence of BN doped 2‐hydroxyethyl methacrylate phosphate coated expandable graphite on flame retardancy and thermal conductivity of styrene‐butadiene rubber composites

Hydroxyapatite-Filled Acrylonitrile-Butadiene Rubber Composites with Improved Cure Characteristics and Reduced Flammability

Study on combustion property and synergistic effect of intumescent flame retardant styrene butadiene rubber with metallic oxides

Thermal behavior of phenolic-based ceramizable composites modified by nano-aluminum oxide

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites