Abstract:This work aimed at evaluating the effect of nickle (Ni) dopant on the catalytic performance of Co3 O4 catalyst for abatement of harmful carbon monoxide (CO), a resistance toward sintering and durability of catalytic activity were also pursued. Choose the Co(NO3 )2 ×6H2 O(aq) as precursor and NaOH as precipitant to prepare cobalt oxide (Co3 O4 ) with precipitation method, then calcined at 300 and 500 °C, separately (named as C3 and C5). The Ni dopant (0.1 ~ 5 wt%) was added by deposited precipitation through Ni(NO3)2 ×6H2 O(aq) with drop wisely added NaOH(aq) into suspended Co3 O4 solution, then put the NaOCl for oxidation to obtain series 0.1%Ni-Co3 O4 , 0.2%Ni-Co3 O4 , 1%Ni-Co3 O4 and 5%Ni-Co3 O4 catalysts. All catalysts were characterized through BET, XRD, TEM/SEM, Raman, ICP and TPR instruments, and evaluated the catalytic performance of CO oxidation with a self-devised fluidized micro-reactor. It was observed that the calcination temperature and loading of dopant remarkably influenced the physicochemical characteristics and catalytic performance of the catalysts. Preferential catalyst was obtained for calcination at 300 °C and loading of Ni dopant below 1%. The doping of Ni on the surface of Co3 O4 enhanced the performance due to the inducing of synergistic effect between Co3 O4 and NiO, while the excessive NiO incorporated to the surface constrained the activity due to the abundant NiO on the surface, overlaying the active sites caused the decreasing of surface area and reducible capacity. Among these series Ni-Co3 O4 catalysts, the 0.2%Ni-Co3 O4 (C3) catalyst behaved an eminent activity with T50 of 98 °C and durability without apparent deactivation for 50 hr reaction at 125 °C. The excellent performance is primarily attributed to the synergistic effect and formation of NiCo2 O4 composite oxide.

Influence of Doping of Niobium Oxide on the Catalytic Activity of Pt/Al2O3 for CO Oxidation

Shaped Pt-Ni Nanocrystals with an Ultrathin Pt-enriched Shell Derived from One-Pot Hydrothermal Synthesis As Active Electrocatalysts for Oxygen Reduction

ABATEMENT OF HARMFUL CARBON MONOXIDE OVER THE NICKLE DOPED CO3 O4 CATALYST

NOx storage and reduction performance of Pt–CoOx–BaO/Al2O3 catalysts: Effects of cobalt loading and calcination temperature

Effects of Pd Doping on N2O Formation over Pt/BaO/Al2O3 During NO X Storage and Reduction Process

Investigation of Pt-Dy Co-Doping Effects on Isothermal Oxidation Behavior of (Co,ni)-Based Alloy

Promoted Platinum Catalytic Activity and Thermal Stability with Nano-Scale Cobalt Oxide Coating Via Atomic Layer Deposition

Bimetallic Pt-Co Nanoparticle Deposited on Alumina for Simultaneous CO and Toluene Oxidation in the Presence of Moisture

Synthesis and Acid Catalytic Activity of Al‐Doped Spiky‐Shaped Niobium Pentoxide

Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for CO Oxidation

Synergetic Effect of Surface and Subsurface Ni Species at Pt-Ni Bimetallic Catalysts for Co Oxidation

Promotional Effect of Pt-Doping on the Catalytic Performance of Pt−CeO2 Catalyst for CO Oxidation

Role of Ptnc-FeOx metal-oxide interface in enhancing the catalytic activity for CO oxidation

Transition Metal (fe2o3, Co3O4 and NiO)-Promoted CuO-Based Α-Mno2 Nanowire Catalysts for Low-Temperature CO Oxidation

Spotlight on Pt/γ-Al2O3 with High Catalytic Performance Induced by Barium: Synergistic Effect of Electron-Rich Ptδ- Single-Atoms and Available Oxygen Species

Synergetic Effect Dependence on Activated Oxygen in the Interface of NiOx-modified Pt Nanoparticles for the CO Oxidation from First-Principles

Pt nanoparticles supported on mesoporous carbon nanocomposites incorporated with Ni or Co nanoparticles for fuel cells

Effects of Co 2+ Doping on Physicochemical Behaviors of Hierarchical NiO Nanostructure

Graphene Supported Nano Particles of Pt–Ni for CO Oxidation

Modification of Mnco2ox Catalysts by Nbox for Low Temperature Selective Catalytic Reduction of No with Nh3

Sub-6 nm Fully Ordered L10-Pt-Ni-Co Nanoparticles Enhance Oxygen Reduction via Co Doping Induced Ferromagnetism Enhancement and Optimized Surface Strain