Abstract:This study investigates an electrochemical approach for the treatment of water polluted with per- and poly-fluoroalkyl substances (PFAS), looking at the impact of different variables, contributions from generated radicals, and degradability of different structures of PFAS. Results obtained from a central composite design (CCD) showed the importance of mass transfer, related to the stirring speed, and the amount of charge passed through the electrodes, related to the current density on decomposition rate of PFOA. The CCD informed optimized operating conditions which we then used to study the impact of solution conditions. Acidic condition, high temperature, and low initial concentration of PFOA accelerated the degradation kinetic, while DO had a negligible effect. The impact of electrolyte concentration depended on the initial concentration of PFOA. At low initial PFOA dosage (0.2 mg L-1), the rate constant increased considerably from 0.079 ± 0.001 to 0.259 ± 0.019 min-1 when sulfate increased from 0.1% to 10%, likely due to the production of SO4•-. However, at higher initial PFOA dosage (20 mg L-1), the rate constant decreased slightly from 0.019 ± 0.001 to 0.015 ± 0.000 min-1, possibly due to the occupation of active anode sites by excess amount of sulfate. SO4•- and •OH played important roles in decomposition and defluorination of PFOA, respectively. PFOA oxidation was initiated by one electron transfer to the anode or SO4•-, undergoing Kolbe decarboxylation where yielded perfluoroalkyl radical followed three reaction pathways with •OH, O2 and/or H2O. PFAS electrooxidation depended on the chemical structures where the decomposition rate constants (min-1) were in the order of 6:2 FTCA (0.031) > PFOA (0.019) > GenX (0.013) > PFBA (0.008). PFBA with a shorter chain length and GenX with -CF3 branching had slower decomposition than PFOA. While presence of C-H bonds makes 6:2 FTCA susceptible to the attack of •OH accelerating its decomposition kinetic. Conducting experiments in mixed solution of all studied PFAS and in natural water showed that the co-presence of PFAS and other water constituents (organic and inorganic matters) had adverse effects on PFAS decomposition efficiency.

Efficient electro-oxidation-based degradation of per- and polyfluoroalkyl (PFAS) persistent pollutants by using plasma torch synthesized pure-Magnéli phase-Ti 4 O 7 anodes

Efficient electro-oxidation-based degradation of per- and polyfluoroalkyl (PFAS) persistent pollutants by using plasma torch synthesized pure-Magnéli phase-Ti4O7 anodes

Enhanced Electrochemical Degradation of Per- and Polyfluoroalkyl Substances (PFAS) by Activating Persulfate on Boron-Doped Diamond (BDD) Anode

An Energy Efficient Process for Degrading Perfluorooctanoic Acid (PFOA) Using Strip Fountain Dielectric Barrier Discharge Plasma

Removal of PFAS from Aqueous Solution Using PbO2 from Lead-Acid Battery.

Electrochemical Advanced Oxidation combined to Electro-Fenton for effective Treatment of Perfluoroalkyl substances "PFAS" in Water using a Magnéli phase-based Anode

Investigating the Effect of Polarity Reversal of the Applied Current on Electrochemical Degradation of Per-and Polyfluoroalkyl Substances

Can Perfluorooctanoic Acid Be Effectively Degraded Using Β-Pbo2 Reactive Electrochemical Membrane?

Mechanism and Reactive Species in a Fountain-Strip DBD Plasma for Degrading Perfluorooctanoic Acid (PFOA)

New Insights into the PFAS Defluorination Performance and Mechanism of Ultrasound-Enhanced Electrochemistry with Peroxydisulfate Electrolyte

Ultrasound-enhanced Magnéli phase Ti4O7 anodic oxidation of per- and polyfluoroalkyl substances (PFAS) towards remediation of aqueous film forming foams (AFFF)

Electrochemical degradation of perfluorooctanoic acid (PFOA) by Ti/SnO2-Sb, Ti/SnO2-Sb/PbO2 and Ti/SnO2-Sb/MnO2 anodes

Enhanced perfluorooctane acid mineralization by electrochemical oxidation using Ti3+ self-doping TiO2 nanotube arrays anode

Electrochemical degradation of PFOA and its common alternatives: Assessment of key parameters, roles of active species, and transformation pathway

Amorphous Pd-Loaded Ti4o7 Electrode For Direct Anodic Destruction Of Perfluorooctanoic Acid

Degradation of a Persistent Organic Pollutant Perfluorooctane Sulphonate with Ti/SnO2–Sb2O5/PbO2-PTFE Anode

PFAS degradation by anodic electrooxidation: Influence of BDD electrode configuration and presence of dissolved organic matter

Enhanced perfluorooctanoic acid (PFOA) degradation by electrochemical activation of peroxydisulfate (PDS) during electrooxidation for water treatment

Treatment of perfluoroalkyl acids in concentrated wastes from regeneration of spent ion exchange resin by electrochemical oxidation using Magnéli phase Ti4O7 anode

Degradation of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water by use of a nonthermal plasma-ozonation cascade reactor: Role of different processes and reactive species

Efficient decomposition of perfluorooctane sulfonate by electrochemical activation of peroxymonosulfate in aqueous solution: Efficacy, reaction mechanism, active sites, and application potential