Abstract:Purpose: In order to build up a reliable dose monitoring system for boron neutron capture therapy (BNCT) applications at the TRIGA reactor in Mainz, a computer model for the entire reactor was established, simulating the radiation field by means of the Monte Carlo method. The impact of different source definition techniques was compared and the model was validated by experimental fluence and dose determinations. Methods: The depletion calculation code origen2 was used to compute the burn-up and relevant material composition of each burned fuel element from the day of first reactor operation to its current core. The material composition of the current core was used in a mcnp5 model of the initial core developed earlier. To perform calculations for the region outside the reactor core, the model was expanded to include the thermal column and compared with the previously established attila model. Subsequently, the computational model is simplified in order to reduce the calculation time. Both simulation models are validated by experiments with different setups using alanine dosimetry and gold activation measurements with two different types of phantoms. Results: The mcnp5 simulated neutron spectrum and source strength are found to be in good agreement with the previous attila model whereas the photon production is much lower. Both mcnp5 simulation models predict all experimental dose values with an accuracy of about 5%. The simulations reveal that a Teflon environment favorably reduces the gamma dose component as compared to a polymethyl methacrylate phantom. Conclusions: A computer model for BNCT dosimetry was established, allowing the prediction of dosimetric quantities without further calibration and within a reasonable computation time for clinical applications. The good agreement between the mcnp5 simulations and experiments demonstrates that the attila model overestimates the gamma dose contribution. The detailed model can be used for the planning of structural modifications in the thermal column irradiation channel or the use of different irradiation sites than the thermal column, e.g., the beam tubes.

V2:Performance of the solid deuterium ultra-cold neutron source at the pulsed reactor TRIGA Mainz

A superfluid helium converter for accumulation and extraction of ultracold neutrons

A neutron trigger detector for pulsed reactor neutron sources

Cubic boron nitride: a new prospective material for ultracold neutron application

Confirmation of a realistic reactor model for BNCT dosimetry at the TRIGA Mainz

τ SPECT: A spin-flip loaded magnetic ultracold neutron trap for a determination of the neutron lifetime

UCN sources at external beams of thermal neutrons. An example of PIK reactor

Characterization of electroless nickel-phosphorus plating for ultracold-neutron storage

Monte Carlo Simulations of Trapped Ultracold Neutrons in the UCNτ Experiment

The new Cold Neutron Chopper Spectrometer at the Spallation Neutron Source - Design and Performance

Dependence of neutron rate production with accelerator beam profile and energy range in an ADS-TRIGA RC1 reactor

An intense source of very cold neutrons using solid deuterium and nanodiamonds for the European Spallation Source

A fast-switching magnet serving a spallation-driven ultracold neutron source

Accumulation and extraction of ultracold neutrons from a superfluid helium converter coated with fluorinated grease

An ultracold neutron storage bottle for UCN density measurements

Characterization of a Deuterium-Deuterium Plasma Fusion Neutron Generator

Time-of-flight spectroscopy of ultracold neutrons at the PSI UCN source

Production of Ultra-Cold-Neutrons in Solid α-Oxygen

Computational Optimization of 133mXe Production in the Washington State University TRIGA Reactor

Efficient extraction of a collimated ultra-cold neutron beam using diffusive channels

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation