Abstract:Determination of the failure pressure of pipelines containing multiple corrosion defects is critical to the integrity and safety of the pipeline infrastructure. In this work, finite element models were developed to determine the failure pressures of X46, X60 and X80 steel pipelines containing multiple corrosion defects with varied geometries and orientations by assessing the mutual interaction of the defects and the effect on pipeline integrity. Generally, the failure pressure of corroded pipelines decreases with the increasing interaction effect between corrosion defects. The interaction effect mainly depends on the mutual orientation of the defects and their geometry and spacing, rather than the steel grade. For longitudinally and circumferentially aligned corrosion defects present on a pipeline, the interaction effect between them does not exist when their spacing is larger than 2.5 Dt and 5.3 t, respectively, where D and t are diameter and wall thickness of the pipeline. As a result, the multiple defects can be assessed individually. Compared to circumferential corrosion defects, the longitudinal defects are associated with a larger spacing where the interaction effect between corrosion defects exists. The circumferential spacing of corrosion defects has a less impact on the failure pressure of corroded pipelines compared with the longitudinal spacing. For pipelines containing overlapped corrosion defects, the failure pressure is lowered, compared to that in the presence of a single top layer defect only. An increase in the depth of either top or bottom layer corrosion defect reduces the failure pressure of the pipeline. The increased length of the defect also increases the interaction effect between the overlapped defects, lowering the failure pressure of the pipeline.

Prediction of the failure pressure for complex corrosion defects

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Analytical prediction of failure pressure for pipeline with long corrosion defect

Assessment on failure pressure of high strength pipeline with corrosion defects

Failure pressure analysis of corroded moderate-to-high strength pipelines

Burst Pressure Prediction of Pipes With Internal Corrosion Defects

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

A new evaluation method for burst pressure of pipeline with colonies of circumferentially aligned defects

Effects of depth in external and internal corrosion defects on failure pressure predictions of oil and gas pipelines using finite element models

Burst strength analysis of pressurized steel pipelines with corrosion and gouge defects

Failure Pressure Prediction of Medium to High Toughness Pipe with Circumferential Interacting Corrosion Defects Subjected to Combined Loadings Using Artificial Neural Network

Assessment by finite element modeling of the interaction of multiple corrosion defects and the effect on failure pressure of corroded pipelines

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Failure pressure prediction by defect assessment and finite element modelling on pipelines containing a dent-corrosion defect

Determination of Folias Factor for Failure Pressure of Corroded Pipeline

Failure Pressure Estimation of Corroded Pipeline with Different Depths of Interacting Defects Subjected to Internal Pressure

Predicting the Failure Pressure of Pipelines Containing Nonuniform Depth Corrosion Defects Using the Finite Element Method

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Failure pressure prediction of high-strength steel pipe bend considering pipe and corrosion geometry