Abstract:Racing propeller in waves has long been a research hot topic but still lacks research achievements due to high difficulties both in numerical simulation and experiment. Thus more in-depth investigations are required especially those based on new numerical method, including accurate simulation of the drastic deformation of the free surface such as plunging and breaking, and accurate prediction of the serious fluctuation and deterioration of its hydrodynamic performance partially caused by the free-surface deformation. Previous numerical studies upon propeller performance in waves have focused on the fully-submerged conditions, where usually the Reynolds-Averaged Navier-Stokes (RANS) models are used to simulate the inconspicuous free surface deformation. Considering marginal air bubbles and gas-liquid mixing phenomenon around the racing propeller, instead of RANS, Large Eddy Simulation (LES) together with overset mesh method and Volume of Fluid (VOF) method is adopted in this paper for investigating the hydrodynamic performance of a racing open water propeller in regular head waves. The numerical simulation has been performed under variant submergence depths and advance coefficients, and the deformation of the free surface and its relation to propeller thrust and torque are discussed. The results of numerical simulation are validated by corresponding experiments conducted in the Circulating Water Channel Laboratory of Shanghai Jiao Tong University. The numerical errors against experimental results of time-averaged and transient thrust and torque based on LES model are reasonable and acceptable, which implies that the LES model used in this paper is suitable in dealing with propeller performance in racing conditions. As conclusions, the deterioration of time-averaged thrust and torque of racing open water propeller in regular head waves is more serious when the advance coefficient is relatively low. The fluctuation amplitude of thrust and torque time-series decreases as submergence depth increases.

Hydroelastic Analysis of 3D Printed Marine Propeller Working at Low Reynolds Number

Numerical study of the hydrodynamic performances of surface piercing propeller

Structural Design of a Large-Scale 3D-Printed High-Altitude Propeller: Methodology and Experimental Validation

Hydrodynamic Performances of Aeronautical Propeller for Drones

A Comparison of Physical and Numerical Modeling of Homogenous Isotropic Propeller Blades

Numerical study on hydrodynamic and acoustic performance of a redesigned ducted propeller

The Hydrodynamic Analysis of Propeller Based on ANSYS-CFX

A numerical method for predicting the hydroelastic response of marine propellers

Numerical Analysis of Ducted Propeller Performance under Open Water Test Condition

Parametric Analysis on Hydroelastic Behaviors of Hydrofoils and Propellers Using a Strongly Coupled Finite Element/panel Method

Hydrodynamic Coefficient Estimation of Small Autonomous Underwater Vehicle

Numerical Approach Based on Solving 3D Navier–Stokes Equations for Simulation of the Marine Propeller Flow Problems

Cavitation Hydrodynamic Performance of 3-D Printed Highly Skewed Stainless Steel Tidal Turbine Rotors

Numerical Investigation on Hydrodynamic Performance of a Ducted Propeller for Vectored Underwater Robot

Hydro-acoustic and structural analysis of marine propeller using two-way fluid–structure interaction

Numerical and Experimental Analysis of A Ducted Propeller Designed by A Fully Automated Optimization Process under Open Water Condition

CFD Simulation of Racing Open Water Propeller’s Hydrodynamic Performance in Regular Head Waves Based on Large Eddy Simulation

The Numerical Investigation on Hydrodynamic Performance of Twisted Rudder During Self-propulsion

Hydrodynamic Performance of the 3D Hydrofoil at the Coupled Oscillating Heave and Pitch Motions

Numerical Analysis and Performance Comparison of the Same Series of Composite Propellers

Numerical Prediction of the Effective Wake Profiles of a High-Speed Underwater Vehicle with Contra-Rotating Propellers