Abstract:Glasses, which date back to about 2500 BC, originated in Mesopotamia and were later brought to Egypt in approximately 1450 BC. In contrast to the long-range order materials (crystalline materials), the atoms and molecules of glasses, which are noncrystalline materials (short-range order) are not organized in a definite lattice pattern. Metallic glassy materials with amorphous structure, which are rather new members of the advanced materials family, were discovered in 1960. Due to their amorphous structure, metallic glassy alloys, particularly in the supercooled liquid region, behave differently when compared with crystalline alloys. They reveal unique and unusual mechanical, physical, and chemical characteristics that make them desirable materials for many advanced applications. Although metallic glasses can be produced using different techniques, many of these methods cannot be utilized to produce amorphous alloys when the system has high-melting temperature alloys (above 1500 °C) and/or is immiscible. As a result, such constraints may limit the ability to fabricate high-thermal stable metallic glassy families. The purpose of this research is to fabricate metallic glassy (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, and 35 at. %) by cold rolling the constituent powders and then mechanically alloying them in a high-energy ball mill. The as-prepared metallic glassy powders demonstrated high-thermal stability and glass forming ability, as evidenced by a broad supercooled liquid region and a high crystallization temperature. The glassy powders were then consolidated into full-dense bulk metallic glasses using a spark plasma sintering technique. This consolidation method did not result in the crystallization of the materials, as the consolidated buttons retained their short-range order fashion. Additionally, the current work demonstrated the capability of fabricating very large bulk metallic glassy buttons with diameters ranging from 20 to 50 mm. The results indicated that the microhardness of the synthesized metallic glassy alloys increased as the W concentration increased. As far as the authors are aware, this is the first time this metallic glassy system has been reported.

Glassy nature of Ce65Al25Co10 alloy: A metallic glass

Glass-forming ability and thermal stability of Gd55-xNd xCo20Al25 metallic glass

Micro-structural characteristics and indentation behavior of Ce-Al-Ga alloys

Structural origin of the high glass-forming ability of Ce70Ga10Cu20 alloys

Centimeter-sized (La0.5ce0.5)-Based Bulk Metallic Glasses

Glass-Forming Ability of Al-Co Alloy under Rapid Annealing

Glass-Forming Ability and Soft Magnetic Properties of (Co75Ti25)100-xFex (x; 0-20 at.%) Systems Fabricated by SPS of Mechanically Alloyed Nanopowders

Refining Mechanism and Elevated-Temperature Mechanical Properties of Al-Ce Alloys Solidified under Super Gravity Field

Amorphous structure of binary Ca61Al39 metallic glass close to transition temperature

Mechanically-Induced Solid-State Reaction for Fabrication of Soft Magnetic (Co75Ti25)100-xBx (x: 2, 5, 10, 15, 20, 25 at%) Metallic Glassy Nanopowders

Formation and ultrahigh mechanical strength of multicomponent Co-based bulk glassy alloys

Micro-alloying effects of Co on structural and dynamic properties of CeAlCu glass-forming melts by ab initio molecular dynamics simulations

Low-density to high-density transition in Ce75Al23Si2 metallic glass.

Phase Transformations from Nanocrystalline to Amorphous (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, 35 at. %) and Subsequent Consolidation

Beating Homogeneous Nucleation and Tuning Atomic Ordering in Glass-Forming Metals by Nanocalorimetry

Thermal stability, phase transformations and mechanical properties of a Fe64B24Y4Nb6 metallic glass

Long-Range Topological Order In Metallic Glass

Influence of Similar Atom Substitution on Glass Formation in (La-Ce)-Al-Co Bulk Metallic Glasses

Low-density to high-density transition in Ce<sub>75</sub>Al<sub>23</sub>Si<sub>2</sub>metallic glass

Microstructure and crystallization in Cu50Zr45Al5 metallic glass

First attempt to print Co-based alloys with high glass forming ability by selective laser melting