Abstract:Selective laser melting (SLM) in situ alloying is an effective way to design and fabricate novel materials in which the elemental powder is adopted as the raw material and micro-areas of elemental powder blend are alloyed synchronously in the forming process of selective laser melting (SLM). The pre-alloying process of preparation of raw material powder can be left out, and a batch of bulk samples can be prepared via the technology combined with quantitative powder mixing and feeding. The technique can be applied to high-throughput sample preparation to efficiently obtain a microstructure and performance data for material design. In the present work, bulk equiatomic FeCoCrNi high-entropy alloys with different processing parameters were fabricated via laser in situ alloying. Finite element simulation and CALPHAD calculation were used to determine the appropriate SLM and post-heating parameters. SEM (scanning electron microscope), EDS (energy dispersive spectroscopy), XRD (X-ray diffraction), and mechanical testing were used to characterize the composition, microstructure, and mechanical properties of as-printed and post-heat-treated samples. The experimental results show that the composition deviation of laser in situ alloying samples could be controlled within 20 wt %. The crystal structure of as-printed samples is a single-phase face-centered cubic (FCC), which is the same as those prepared by the traditional method. The mechanical properties of the samples prepared by laser in situ alloying with elemental powder blend are comparable to those prepared by pre-alloying powder and much higher than those prepared by the traditional method (arc melting). As-printed samples can get a homogeneous microstructure under the optimal laser in situ alloying process combined with post-heat treatment at 1200 °C for 20 h.

First attempt to print Co-based alloys with high glass forming ability by selective laser melting

Investigation of Mechanical and Magnetic Properties of Co-Based Amorphous Powders Obtained by Atomization

Structural investigations of Fe-Zr-Si-Cu metallic glass with low glass-forming ability produced in laser powder bed fusion technology

Effect of Cu addition on the GFA, structure and properties of Fe-Co-based alloy

Glass-Forming Ability and Soft Magnetic Properties of (Co75Ti25)100-xFex (x; 0-20 at.%) Systems Fabricated by SPS of Mechanically Alloyed Nanopowders

Mechanical Behavior of a Medium-Entropy Fe65(CoNi)25Cr9.5C0.5 Alloy Produced by Selective Laser Melting

High-temperature malleable Ta-Co metallic glass developed by combinatorial method

Fabricating Homogeneous FeCoCrNi High-Entropy Alloys via SLM In Situ Alloying

Glass-Forming Ability of Al-Co Alloy under Rapid Annealing

Characteristics of Biometallic Alloy to Additive Manufacturing Using Selective Laser Melting Technology

Structural characterization of newly-developed Al79Ni5Fe5Y11 and Al79Ni11Fe5Y5 alloys with amorphous matrixes

Development of high Bs Fe–Ni-based metal amorphous nanocomposite by optimization of glass-forming ability

Liquid state properties and amorphous solidification kinetics of multicomponent Fe_{50-x}Co_{x}Cr_{14}Mo_{14}C_{9}B_{8}Tm_{5} alloys investigated under containerless processing conditions

Effect of partial substitution of Cr with Co on glass forming ability, mechanical and magnetic properties in Fe48Mo14Cr15-xCoxB6P8Si7Y2 bulk metallic glasses

Structure and properties of a cobalt-chromium-molybdenum alloy obtained by selective laser melting

Co-Based Bulk Metallic Glasses with Good Soft-Magnetic Properties and High Strength

Formation and ultrahigh mechanical strength of multicomponent Co-based bulk glassy alloys

High-strength Fe32Cr33Ni29Al3Ti3 fabricated by selective laser melting

The manufacturing process optimization and the mechanical properties of FeCoCrNi high entropy alloys fabricated by selective laser melting

Liquid state properties and amorphous solidification kinetics of multicomponent alloys investigated under containerless processing conditions

Microstructure and Mechanical Properties of FeCoNiCrAlx High-entropy Alloys by Selective Laser Melting