Abstract:After-treatment devices of diesel engines effectively reduce exhaust emissions but deteriorate over time. Consequently, the China-VI emission regulation mandates a useful life of seven years or 700,000 km for after-treatment devices. Conventional engine bench aging methods, being costly and time-consuming, are inapplicable for long-term emission durability verification. This paper introduces an accelerated aging method based on the thermal accumulation and Arrhenius equation . Accelerated aging of four after-treatment devices of the same model at different temperatures and durations was carried out. Results revealed that barring the CDPF's PN filtration efficiency, the efficiencies of the DOC , SCR, and ASC catalysts declined with accelerated aging, especially under lower temperatures. Deterioration in conversion efficiencies of catalysts increased the NOx, CO, THC, and NH 3 emissions under cold- and warm-WHTC tests. Considering that the equivalent durability mileage of the after-treatment devices under 150 h 650 °C accelerated aging condition is approximately 870,000 km, while the CO, THC, PN, NOx, and NH 3 emission factors are 0.05 g/kWh, 0.21 g/kWh, 2.14 × 10 10 #/kWh, 0.44 g/kWh, and 3.48 ppm, respectively, so the durability of the tested after-treatment devices could comply with the China-VI emission regulation. Although accelerated aging did not significantly affect PN emissions, it increased the balanced point temperature of CDPF and the proportion of sub-23 nm particles. If emission regulations further reduce the lower limit of PN measurement to 10 nm, it could negatively impact the emission durability of CDPF. In addition, comparing the 1000 h of conventional aging showed similar characteristics and results in NOx conversion efficiency and NOx emission, suggesting that the accelerated aging method is reliable. In conclusion, the accelerated aging method reduces the durability verification duration, providing a cost-effective regulatory tool for environmental protection authorities and guidance for manufacturers to optimize device performance and durability.

Study of durability of diesel vehicle emissions performance based on real driving emission measurement

NOx emission deterioration in modern heavy-duty diesel vehicles based on long-term real driving measurements

The effects of deterioration and technological levels on pollutant emission factors for gasoline light-duty trucks.

Research on a China 6b heavy-duty diesel vehicle real-world engine out NOx emission deterioration and ambient correction using big data approach

Using a Chassis Dynamometer to Determine the Influencing Factors for the Emissions of Euro VI Vehicles

Testing Research on Real World Emission Characteristics of Heavy Duty Vehicles and Influencing Factors

Characterization of diesel emission from in-use vehicles and an engine in Beijing, China

Study on Exhaust Emission Test of Diesel Vehicles Based on PEMS

Influences of accumulated mileage and technological changes on emissions of regulated pollutants from gasoline passenger vehicles.

Impact of Shortening Real Driving Emission (RDE) Test Trips on CO, NOX, and PN10 Emissions from Different Vehicles

Light-duty gasoline vehicle emission deterioration insights from large-scale inspection/maintenance data: The synergistic impact of usage characteristics

Accelerated aging for after-treatment devices of diesel engine: Method, emission characteristics, and equivalence

Emission Evaluation for Diesel Vehicles Under Typical Operating Conditions

Real-world greenhouse gas emission characteristics from in-use light-duty diesel trucks in China

Characterization of Exhaust CO, HC and NOx Emissions from Light-Duty Vehicles under Real Driving Conditions

On-board Emission from Heavy-Duty Diesel Vehicle and Its Relationship with Driving Behavior

Adaptability of NTE and AWM Heavy-Duty Diesel Vehicles In-Use Compliance Test Methods to Typical Road Conditions in China

Study of On-Board Emission Measurement for Heavy-Duty Diesel Vehicle and Its Impact with Load

Development of Database of Real-World Diesel Vehicle Emission Factors for China

Characteristics of NOX and NH3 Emissions from In-Use Heavy-Duty Diesel Vehicles with Various Aftertreatment Technologies in China.

Characteristics of NO X and NH 3 emissions from in-use heavy-duty diesel vehicles with various aftertreatment technologies in China