Abstract:Simulations of human-technology interaction in the context of product development require comprehensive knowledge of biomechanical in vivo behavior. To obtain this knowledge for the abdomen, we measured the continuous mechanical responses of the abdominal soft tissue of ten healthy participants in different lying positions anteriorly, laterally, and posteriorly under local compression depths of up to 30 mm. An experimental setup consisting of a mechatronic indenter with hemispherical tip and two time-of-flight (ToF) sensors for optical 3D displacement measurement of the surface was developed for this purpose. To account for the impact of muscle tone, experiments were conducted with both controlled activation and relaxation of the trunk muscles. Surface electromyography (sEMG) was used to monitor muscle activation levels. The obtained data sets comprise the continuous force-displacement data of six abdominal measurement regions, each synchronized with the local surface displacements resulting from the macro-indentation, and the bipolar sEMG signals at three key trunk muscles. We used inverse finite element analysis (FEA), to derive sets of nonlinear material parameters that numerically approximate the experimentally determined soft tissue behaviors. The physiological standard values obtained for all participants after data processing served as reference data. The mean stiffness of the abdomen was significantly different when the trunk muscles were activated or relaxed. No significant differences were found between the anterior-lateral measurement regions, with exception of those centered on the linea alba and centered on the muscle belly of the rectus abdominis below the intertubercular plane. The shapes and areas of deformation of the skin depended on the region and muscle activity. Using the hyperelastic Ogden model, we identified unique material parameter sets for all regions. Our findings confirmed that, in addition to the indenter force-displacement data, knowledge about tissue deformation is necessary to reliably determine unique material parameter sets using inverse FEA. The presented results can be used for finite element (FE) models of the abdomen, for example, in the context of orthopedic or biomedical product developments.

Multi-Indenter Device for in Vivo Biomechanical Tissue Measurement

Multi-Material 3-D Viscoelastic Model of a Transtibial Residuum from In-vivo Indentation and MRI Data

A Mechatronic Platform for Calibration and Performance Test of Extrinsic Tactile Sensor on Prosthesis Hand.

Video Enhanced Depth-Sensing Indentation Technique for Characterizing Mechanical Behaviour of Biomaterials

Constitutive parameter identification of transtibial residual limb soft tissue using ultrasound indentation and shear wave elastography

A Mechatronic Platform for Studies of Tactile Sensory System on Prosthesis Hand

Methodology to Investigate Effect of Prosthetic Interface Design on Residual Limb Soft Tissue Deformation

An instrumented tissue tester for measuring soft tissue property under the metatarsal heads in relation to metatarsophalangeal joint angle.

Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications

An Implantable Variable Length Actuator for Modulating in Vivo Musculo-Tendon Force in a Bipedal Animal Model

In-vivo measurement of the human soft tissues constitutive laws. Applications to Computer Aided Surgery

Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data

Development of an implantable trapezium carpal bone replacement for measuring in vivo loads at the base of the thumb

Design, Evaluation, and Implementation of a Novel Magnetic Resonance Imaging-Compatible Physiologic Loading Simulator for Ex-Vivo Joints

Development of an Inverse Approach for the Characterization of In Vivo Mechanical Properties of the Lower Limb Muscles

Cable-Driven Robotic Interface for Lower Limb Neuromechanics Identification

Soft tissue material properties based on human abdominal in vivo macro-indenter measurements

Single Element Ultrasonic Imaging of Limb Geometry: an In-Vivo Study with Comparison to Mri

Method for instrumentation of orthotic joints for measurement of internal joint loads

An FBG-based Stiffness Estimation Sensor for In-vivo Diagnostics

A Custom-Developed Device for Testing Tensile Strength and Elasticity of Vascular and Intestinal Tissue Samples for Anastomosis Regeneration Research