Abstract:Scientific and technological advances in transparent conductive electrodes improve the heating performance of flexible transparent film heaters (TFHs), which can be utilized for various applications as defrosters and heaters. To achieve high performance as well as practical TFHs, several conditions, such as high optical transmittance, low electrical resistance, heating uniformity, and operational stability in various environmental conditions should be satisfied. However, due to the trade-offs between optical transmittance and electrical resistance, it is not easy to fulfill all the requirements concurrently. Here we report flexible TFHs using a ternary composite of silver nanowire (AgNW), conducting polymer (i.e., poly[3,4-ethylenedioxythiophene]:polystyrene sulfonate [PEDOT:PSS]), and a thin conductive oxide (i.e., indium tin oxide [ITO]) layer, exhibiting higher performance in terms of the maximum heating temperature (>110 °C), operational stability, mechanical flexibility, and optical transmittance (95% at 550 nm), compared to pristine AgNW-based TFHs. We also demonstrated the stable operation of the AgNW-PEDOT:PSS/ITO TFHs soaked in water, showing excellent environmental stability. To analyse the fundamental mechanisms for the improved performance of the AgNW-PEDOT:PSS/ITO TFHs, we investigated the progress of joule heating using a device simulator, and found that the improvement originated not only from reduced electrical resistance but also from enhanced heat dissipation with PEDOT:PSS and ITO. We anticipate that our analysis and results will be helpful for further development of practical flexible TFHs.

Echocardiographic diagnosis of a subvalvar aortic membrane

Transparent Selective Photothermal Coatings For Antifogging Applications

Transparent Electrothermal Heaters Based On Vertically-Oriented Graphene Glass Hybrid Materials

Transparent Conducting Electrodes from Conducting Polymer Nanofibers and Their Application as Thin-Film Heaters

Radiative Thermal Coats for Passive Temperature Management

Stretchable and Transparent Ionogel-Based Heaters

The Flexible and Transparent Film Heaters Based on Regenerated Cellulose and Carbon Nanotubes

Flexible Transparent Heater Fabricated from Spray-Coated In:ZnO/Ag-NWs/In:ZnO Multilayers on Polyimide Foil

Copper/silver composite mesh transparent electrodes with low reflection for high-performance and low-voltage transparent heaters

Gallic Acid-Reduced Graphene Oxide Deposited with Carbon Nanotubes for Transparent Film Heaters

Structural Optimization of Oxide/Metal/Oxide Transparent Conductors for High‐Performance Low‐Emissivity Heaters

Flexible Transparent Heat Mirror for Thermal Applications

Flexible Polymer/Metal/Polymer and Polymer/Metal/Inorganic Trilayer Transparent Conducting Thin Film Heaters with Highly Hydrophobic Surface

Stretchable and Transparent Heaters Based on Hydrophobic Ionogels with Superior Moisture Insensitivity

Room Temperature Curable Copper Nanowire-Based Transparent Heater

A Printable Flexible and Transparent Heater Applicable to Arbitrary Surfaces, Fabricable by the Soft-Contact Micropatterning of an Ionic Metal Solution

Indium-free flexible NiO/Ag NW composite transparent conductive thin films for transparent heater

Flexible transparent film heaters using a ternary composite of silver nanowire, conducting polymer, and conductive oxide

Indium Tin Oxide Thin Film Deposition by Magnetron Sputtering at Room Temperature for the Manufacturing of Efficient Transparent Heaters

Gallium doped zinc oxide thin films as transparent conducting oxide for thin-film heaters

Direct Blow Spinning of Flexible and Transparent Ag Nanofiber Heater