Abstract:To address the limitations in actuator selection within strong magnetic environments, this study introduces a novel inertial piezoelectric actuator with asynchronous dual-foot motion, which meets the need for high-precision actuation in strong magnetic field environments. The design principle is to use two driving feet that generate elliptical motion in an alternating method to achieve continuous linear motion of the actuator. This approach enhances load capacity, speed, and stepping characteristics. The design allows for better control of backward motion without modifying the driving waveform, thus improving the actuator's speed and ensuring consistent performance in both directions. A finite element model of the proposed actuator stator is developed and analyzed using commercial software to optimize its dimensional parameters. A prototype is fabricated, and experimental investigations are carried out. The results indicate that the dual asynchronous driving method significantly increases the speed of the actuator and the consistency of the motion by improving stepping characteristics. The prototype reached a maximum speed of 8.98 mm/s, supported a maximum load of 4.5 N, and achieved a displacement resolution of 19 nm. Finally, the strong magnetic field environmental test and MRI image quality test were conducted, and experimental results confirmed that the actuator has superior magnetic compatibility, highlighting its potential for precision applications in challenging environments. This research proposes new methods to enhance the retraction characteristics and output performance of inertial actuators, with their excellent magnetic field compatibility anticipated to be applied in future MRI-compatible injectors, puncture devices, or other actuating mechanisms.

Comparison of Walking and Traveling-Wave Piezoelectric Motors as Actuators in Kinesthetic Haptic Devices

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Vibration Analysis of Stepping Piezoelectric Micro-Motor Using Wiggle Mode

Wave propagations of curvilinear motors driven by partially laminated piezoelectric actuators

A bio-inspired piezoelectric motor with simple structured asymmetric stator

Performance Study of Low Inertia Magnetorheological Actuators for Kinesthetic Haptic Devices

Piezoelectric Actuators and Motors: Materials, Designs, and Applications

Design and Experimental Validation of a Linear Piezoelectric Micromotor for Dual-Slider Positioning

Modeling and Preliminary Analysis of a Miniaturized Rotary Motor Driven by Single Piezoelectric Stack Actuator

Achieving smooth motion of stick–slip piezoelectric actuator by means of alternate stepping

A piezoelectric inertial actuator operating with elliptical drive and stick-slip drive modes

Multi-DOF and Sub-Micrometer Piezoelectric-Electrorheological Stepper Motor

Experimental Validation of Two Types of Force Actuators: A Performance Comparison

Characteristics and attenuation mechanism of linear standing-wave piezoelectric motors with ceramics-mated friction couples

An asynchronous dual-foot inertial piezoelectric actuator with strong magnetic compatibility

Design and Locomotion Study of Two-DOF Actuator Driven by Piezoelectric–Electromagnetic Hybrid Mode

A bipedal cooperative drive method for the stick-slip piezoelectric actuator to achieve smooth motion

Development and Analysis of Multi-Degree-of-Freedom Piezoelectric Actuator Based on Elephant Trunk Structure

Bionic Stepping Motors Driven by Piezoelectric Materials

Research on novel inertial linear ultrasonic piezoelectric motor

A Comprehensive Review of Piezoelectric Ultrasonic Motors: Classifications, Characterization, Fabrication, Applications, and Future Challenges