Abstract:Kinetic Poppe plots for small retained compounds were calculated in HPLC (using pure acetonitrile) and SFC (using pure carbon dioxide) for columns having twenty one different lengths (between 3 cm and 30 m), operated under strict adiabatic conditions (no heat exchange was allowed between the column and the external environment), with a constant pressure drop of 200 bar. The outlet pressures were set at 1 and 160 bar in HPLC and SFC, respectively. The eluent inlet temperature was set at 312 K. The hold-up time t0 and the apparent column efficiency <N> were calculated by taking into account the longitudinal variations of the eluent pressure, its temperature, density, viscosity, heat capacity, thermal expansion coefficient, equilibrium constant, and diffusion coefficient along the column length. Three different classes of stationary phase were considered: fully porous particles and core-shell particles of different diameter and structure, and silica monolithic columns of the second generation. The reduced plate heights of these stationary phases were taken from experimental data obtained with liquid eluents (acetonitrile/water mixtures). The columns were assumed to be radially homogeneous. The Henry's constant of the compound was fixed at Ka=2.0 at the column inlet. The results demonstrate the potential advantage of using sub-3 μm core-shell particles for fast analysis in both LC and SFC, regardless of the intra-particle diffusivity through the stationary phase. In RPLC conditions, the contribution of surface diffusion to intra-particle diffusivity is important and the 4.6 μm core-shell particles can perform as well as sub-2 μm fully porous particles and silica monolithic columns of the second generation. In the absence of surface diffusion or for localized adsorption onto the stationary phase, sub-2 μm particles and silica monolithic column of the second generation outperform the 4.6 μm core-shell particles because the solid-liquid mass transfer resistance controls the column efficiency at high speeds. Eventually, for the same stationary phase and speed of analysis, SFC methods using pure CO2 may provide at least a twice column efficiency than LC methods using pure acetonitrile. For a constant pressure drop and resolution power, SFC methods may generate four times faster analyses than LC methods. Ultimately, a standard commercial 4.6mm × 50mm long column packed with 2.6 μm core-shell particles, operated with an inlet flow rate of 25 mL/min in fast SFC (200 bar back pressure, 40 °C) may provide a hold-up time of about 1s requiring data acquisition at a frequency of 400 Hz, with a variance of 0.35 μL(2). This performance will require the use of new, ultra-low dispersion SFC system.

Achieving quasi-adiabatic thermal environment to maximize resolution power in very high-pressure liquid chromatography: Theory, models, and experiments

Modeling of thermal processes in very high pressure liquid chromatography for column immersed in a water bath: Application of the selected models

Bubble Shape and Rising Velocity in Viscous Liquids at High Temperature and Pressure

The Design of Resistive-Heating System for Capillary Column

On axial temperature gradients due to large pressure drops in dense fluid chromatography

Evaluating the advantages of higher heat conductivity in a recently developed type of core-shell diamond stationary phase particle in UHPLC

Liquid Chromatographic Separation Using a 2 μm i.d. Open Tubular Column at Elevated Temperature

Extending the upper temperature range of gas chromatography with all-silicon microchip columns using a heater/clamp assembly

On the relationship between radial structure heterogeneities and efficiency of chromatographic columns

Prediction of overloaded concentration profiles under ultra-high-pressure liquid chromatographic conditions

Limit of the speed-resolution properties in adiabatic supercritical fluid chromatography

Joule Heating Effects on Separation Efficiency in Capillary Zone Electrophoresis with an Initial Voltage Ramp.

Characterization of High‐Pressure Liquid Chromatography Columns using Chromatographic Methods

Influence of the Column Inner Diameter on Chromatographic Efficiency in Miniaturized and Conventional Ultra-High-Performance Liquid Chromatography

A narrow open tubular column for high efficiency liquid chromatographic separation

A numerical study of the effects of lateral flow and retention in open tubular vortex chromatography

Hydrostaticity of pressure-transmitting media for high pressure infrared spectroscopy

Spiral Tube Assembly for High-Speed Countercurrent Chromatography: Choice of Elution Modes for Four Typical Two-Phase Solvent Systems

Benefits of a special cooling system to improve precision and accuracy in non-vaporizing on-column injection procedures

Harnessing an elastic flow instability to improve the kinetic performance of chromatographic columns