Abstract:The mechanical properties of organic/inorganic composites can be highly dependent on the interfacial interactions. In this work, with organic polymers intercalated into the interlayer of inorganic calcium silicate hydrate (C-S-H), the primary binding phase of Portland cement, great ductility improvement is obtained for the nanocomposites. Employing reactive molecular dynamics, the simulation results indicate that strong interfacial interactions between the polymers and the substrate contribute greatly to strengthening the materials, when C-S-H/poly ethylene glycol (PEG), C-S-H/poly acrylic acid (PAA), and C-S-H/poly vinyl alcohol (PVA) were subject to uniaxial tension along different lattice directions. In the x and z direction tensile processes, the Si-OCa bonds of the C-S-H gel, which were elongated and broken to form Si-OH and Ca-OH, play a critical role in loading resistance, while the incorporation of polymers bridged the neighboring silicate sheets, and activated more the hydrolytic reactions at the interfaces to avoid strain localization, thus increasing the tensile strength and postponing the fracture. On the other hand, Si-O-Si bonds of C-S-H mainly take the load when tension was applied along the y direction. During the post-yield stage, rearrangements of silicate tetrahedra occurred to prevent rapid damage. The polymer intercalation further elongates this post-yield period by forming interfacial Si-O-C bonds, which promote rearrangements and improve the connectivity of the defective silicate morphology, significantly improving the ductility. Among the polymers, PEG exhibits the strongest interaction with C-S-H, and thus C-S-H/PEG possesses the highest ductility. We expect that the molecular-scale mechanisms interpreted here will shed new light on the stress-activated chemical interactions at the organic/inorganic interfaces, and help eliminate the brittleness of cement-based materials on a genetic level.

Liquefaction-induced plasticity from entropy-boosted amorphous ceramics

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

Harvesting room-temperature plasticity in ceramics by mechanically seeded dislocations

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Understanding the Role of 1/2 ⟨110⟩ Dislocations in Deformation Mechanisms of Single-Crystal High-Entropy Carbide Ceramics from Machine Learning Force Field Simulations

Supervariate ceramics: ice‐like solids, stress‐induced liquefaction, and biomineralization

Borrowed dislocations for ductility in ceramics

Extreme dislocation-mediated plasticity of yttria-stabilized zirconia

Damage-tolerant oxides by imprint of an ultra-high dislocation density

Dislocation-toughened ceramics

Ultra-dense dislocations stabilized in high entropy oxide ceramics

Achieving room temperature plasticity in brittle ceramics through elevated temperature preloading

Engineering dislocation‐rich plastic zones in ceramics via room‐temperature scratching

Enhancing plasticity in high-entropy refractory ceramics via tailoring valence electron concentration

Low-Temperature In Situ Large Strain Plasticity Of Ceramic Sic Nanowires And Its Atomic-Scale Mechanism

Mineral fusion via dehydration-induced residual stress: from gels to ceramic monoliths

Plastic deformation in silicon nitride ceramics via bond switching at coherent interfaces

Heterogeneous lattice strain strengthening in severely distorted crystalline solids

Strategies for simultaneous strengthening and toughening via nanoscopic intracrystalline defects in a biogenic ceramic

Insights into the interfacial strengthening mechanisms of calcium-silicate-hydrate/polymer nanocomposites

Lattice distortion enabling enhanced strength and plasticity in high entropy intermetallic alloy