Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Enhancing oxidative hydration of ethylene towards ethylene glycol over metal-modified titanosilicate catalysts

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Regulating the Microenvironments and the D-Band Center of Hierarchical Nimos/Ts-1 Catalyst by Zro2 to Enhance the Hydrodesulfurization Performance of Dibenzothiophene

Resolving the Reaction Mechanism for Oxidative Hydration of Ethylene toward Ethylene Glycol by Titanosilicate Catalysts

Synthesis of Hydrophobic Nanosized Hierarchical Titanosilicate-1 Zeolites by an Alkali-Etching Protocol and Their Enhanced Performance in Catalytic Oxidative Desulphurization of Fuels

Influence of Ni species on the structural evolution of Cu/SiO2 catalyst for the chemoselective hydrogenation of dimethyl oxalate

Interfacial synergistic effect in SnO2/PtNi nanocrystals enclosed by high-index facets for high-efficiency ethylene glycol electrooxidation

Tuning Catalytic Selectivity of Oxidative Catalysis Through Deposition of Nonmetallic Atoms in Surface Lattice of Metal Oxide

Catalytic Performance and Texture of Teos Based Cu/Sio2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Insights into Interfacial Synergistic Catalysis over Ni@TiO 2- x Catalyst toward Water-Gas Shift Reaction.

Shielding effect‐engineered single‐crystalline Ti‐rich nanosized aggregated TS‐1 for 1‐hexene epoxidation

Enhanced Catalytic Performance for SiO2–TiO2 Binary Oxide Supported Cu-based Catalyst in the Hydrogenation of Dimethyloxalate

Efficient Hydrogenation of Dimethyl Oxalate to Ethylene Glycol Via Nickel Stabilized Copper Catalysts

Preparation of Ethylene Glycol Via Catalytic Hydration with Highly Efficient Supported Niobia Catalyst

Enhancing the Catalytic Properties of Mordenites via an Alkali-Acid Treatment and by Loading Nickel-Cerium during o-Ethyltoluene Isomerization

Nickel-tungsten co-doped biochar catalyst boosting ethylene glycol production from cellulose hydrogenolysis

Synergy of Mn and Ni Enhanced Catalytic Performance for Toluene Combustion over Ni-doped Α-Mno2 Catalysts

Amino acid-assisted synthesis of TS-1 zeolites containing highly catalytically active TiO6 species

Engineering Pt-Mn2O3 interface to boost selective oxidation of ethylene glycol to glycolic acid

Effect of Oxide Support on Catalytic Performance of FeNi‐based Catalysts for CO2‐assisted Oxidative Dehydrogenation of Ethane

Preparation and Catalytic Performance in Propylene Epoxidation of Hydrophobic Hierarchical Porous TS-1 Zeolite