Abstract:Background: The passage of a lead in tissues and in the cardiovascular system depends on the implantation technique. The structure of the leads, which is a combination of two or more materials, triggers their wear. Breakage of the external pacemaker (PM) lead insulation causes unsealing of the lead and exposure of its internal spaces, which can be the anchor of lead-dependent infective endocarditis (LDIE). In the case of implantable cardioverter-defibrillator (ICD) leads, damage to external insulation isthe cause of externalisation of the cable. Aim: To describe endocardial lead abrasion as a tribological phenomenon resulting from rubbing the leads against each other in the mechanism of polymer on polymer friction, and other mechanisms associated with lead structure i.e. polymer on metal friction. Methods: Twenty-two leads were extracted from ten patients (three women) aged 66.5 ± 13.4 years. In all cases, the reason for lead removal was infection — in 80% LDIE. The PM (one ICD) two- and three-lead systems, all with silicone insulation, were aged 3–25, mean 8.3 years. The destroyed polymer insulation was examined by optical and scanning electron microscopy. The site of damage was defined as the length of the lead from its distal end. This lead segment motion was analysed on chest scopy performed prior to the removal procedure. In this way, three sites of lead damage were distinguished: intracardiac, intravenous, and intrapocket. Tribological wear was observed on the polymer-metal interface and between the leads. The following characteristics were recorded: the type of PM or ICD system in which the extracted leads worked, the lead dwell time,and the lead model. Results: Scanning electron examinations showed that in all cases lead insulation had undergone tribological failure. In all samples, the image of fatigue wear was recorded. In all examined places, we found evidence that adhesive wear was present with the transfer of material to the edges of friction zones and/or to friction partners. In 80% of the patients with LDIE, a total breakage of insulation and abrasive wear was observed, especially when a lead cyclically bent and rubbed against another lead. Abrasive wear was the cause of lead unsealing at sites of strong lead bending, in the right atrium near the tricuspid valve. Conclusions: Acknowledging the tribological mechanism may connect the commonly known crush syndrome with lead abrasion in the cardiac implantable device pocket and in the heart cavity.

ICD lead failure detection in chronic soaked leads

Outer insulation failure in a multilumen ICD lead.

In Vivo Durability of Polyurethane Insulated Implantable Cardioverter Defibrillator (ICD) Leads

Endocardial silicone lead wear: description of tribological phenomena on the basis of microscopic examination of removed leads. Preliminary report

Diagnostic Approach to Suspected Lead Failure

Lb-469803-01 Leadr In Defibrillation: Global Pivotal Trial Results Of A Novel, Small-Diameter Defibrillation Lead Designed For Reliability

Risk Factors and Temporal Trends of Complications Associated With Transvenous Implantable Cardiac Defibrillator Leads.

The feasibility of in-vitro testing in ICD implantation procedure

T wave sensing test during ICD implantation procedure in inherited arrhythmias patients

Cardiovascular Implantable Electronic Device Lead Safety: Harnessing Real-World Remote Monitoring Data for Medical Device Evaluation

Mechanical Behavior of Polyurethane Insulation of CRT Leads in Cardiac Implantable Electronic Devices: A Comparative Analysis of In Vivo Exposure and Residual Properties

High predicted durability for the novel small-diameter OmniaSecure defibrillation lead

Efficacy Analysis of Pace/Sense Lead Implantation in Management of Cardioverter-Defibrillator Lead Malfunction

Riata lead failure manifests as electrical storm with lead parameters showing unique postural variations: a case report

Hybrid Cathode Lithium Battery Discharge Simulation for Implantable Cardioverter Defibrillators Using a Coupled Electro-Thermal Dynamic Model

Clinical application of right ventricular defibrillator leads with floating atrial sensing bipolar electrodes

Extraction and Reimplantation of a Subcutaneous Implantable Cardioverter Defibrillator: Two Cases and a Review of the Literature

Automated and Wireless Accelerated Heat Soak Testing System to Assess Hermetic Failure Mechanism of Inductively Powered Implantable Medical Applications

Lead Management: Device Programming and Defibrillation Threshold Testing

Direct anchoring technique for pacing and defibrillation leads inserted through cephalic vein: insight for a single high-volume center

Could Persistency of Current of Injury Forecast Successful Active-Fixation Pacing Lead Implantation?