Abstract:Abstract Previous studies of test coils have demonstrated the high thermal and electrical stability of no-insulation (NI) high temperature superconducting (HTS) coils thanks to the presence of turn-to-turn current paths. These turn-to-turn current paths in a NI coil are significantly influenced by the contact resistivity. In practice, it is very challenging to measure the contact resistivity of a NI coil by direct experiments of short samples, since the contact resistivity of superconducting tapes is influenced by surface roughness and tolerance, stress, temperature etc. A proper simulation model is needed to investigate the contact resistivity of the NI coils with dedicated experiments. Hence, in this paper a distributed circuit model is employed. This model, implemented in Matlab 2018a, considers the local contact resistivity, self and mutual inductance, and HTS resistance, which depends on the supplied current, magnetic field and temperature. To validate the model, experimental results from literature, including sudden discharge, and charge–discharge processes, are employed and the results from simulations are consistent with experimental results. Then the model is used to investigate the equivalent contact resistivity of a 157-turn NI coil. Through the comparison of simulated and experimental results, it is found that the contact resistivity of the NI coil has an inhomogeneous distribution. When the current changes with different speeds, ramping rates or frequency, a different number of turn-to-turn contacts carries radial current. Since the turn-to-turn contacts have different contact resistivity, the equivalent contact resistivity calculated from sudden discharge cannot be used in simulations to reproduce all the experimental data.

The transient discharge circuit analysis of single-turn coil

Magnet circuit design and optimization of giant magnetostrictive transducer

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Shock dynamics model based on the conductor hardening and thermal softening effects for single-turn coil

Modelling of the conductor vaporization process for single-turn coil

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Design of magnetic field with high homogeneity for single-turn coil

The non-exponential decay characteristics of HTS NI-class coils in sudden discharge experiments

A reluctance-based electromagnetic transient model for the Sen Transformer with inter-turn fault

Three-dimensional simulation of the coupled electromagnetic-mechanical responses in a no-insulation racetrack coil

On switching transient modeling and analysis of electronic on-load tap-changers based Sen transformer

A Continuously Magnetic Valve Arc-Suppression Coil and Its Modeling

AC Analysis of a High Temperature Superconductor Coil with Short Circuits

The Improved Magnetic Shield Type High T/sub C/ Superconducting Fault Current Limiter and the Transient Characteristic Simulation

An electromagnetic-thermal-mechanical coupling model of dry-wound HTS coil based on T-A formulation with Neumann boundary condition

Coupling Circuit Model and Discharge Waveform Prediction for Keda Torus Experiment

Coil Relative Position Transient Issue in Wireless Power Transfer Systems

Analysis on dynamic stability of superconducting coils in a three-coil partial torus

Study on the Coil Design of the Reusable Linear Magnetic Flux Compressor

Study of contact resistivity of a no-insulation superconducting coil