Abstract:Due to the extremely complex and strict service conditions of non-magnetic drill collars, the friction, wear and corrosion will lead to their damage and failure. Therefore, the surface modification technology can be used to substantially improve the surface performance and effectively extend the service life of non-magnetic drill collars. Under this engineering background, the laser cladding technology was employed to fabricate pure Inconel 625 and Inconel 625/WC coatings on the surface of TWZ-2 non-magnetic steel substrate, and the influences of WC content on the microstructure, phase composition, element distribution, microhardness and wear and corrosion resistance of these coatings were analyzed. The experimental results show that the microstructures of pure Inconel 625 and Inconel 625/WC coatings are all composed of planar grain, cellular grain, columnar grain and equiaxed grain successively. The phases of pure Inconel 625 coating are composed of γ-Ni phase and Laves phase. With WC particles mixed into Inconel 625 powder, various carbide phases appear in the composite coatings. The higher the WC content, the more the precipitated carbides formed by the reaction, thus aggravating the segregation of the solid solution strengthening elements. Besides, W and C elements present severe local segregation due to the undissolved WC particles. In terms of the hardening and strengthening effects of WC particles, the microhardness of the coatings gradually increases with the rise of WC content. The wear mechanisms of substrate and coatings are all compound wears, and different wear forms have different priorities. Accordingly, the wear mechanisms would change with the WC content. The higher the WC content, the lower the wear loss of coating, and the better the wear and friction resistance. Moreover, the corrosion resistance of coatings is better than that of substrate. With the increase of WC content, the corrosion resistance of the composite coatings decreases gradually.

Effect of nano-La2O3 doping on the tribological behavior of laser cladded WC-12Co coating on 65Mn steel under water lubrication condition

Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/N125 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel

Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/Ni25 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel

Microstructure, interface characteristics and tribological properties of laser cladded NiCrBSi-WC coatings on PH 13-8 Mo steel

Effect of WC–Co addition on tribological and cracking behavior of laser cladded Fe-based amorphous/crystalline composite coatings

Effect of La2O3 on the microstructure and wear resistance of laser clad nickel-based alloy coatings

Effect of WC content on microstructure and properties of high-speed laser cladding Ni-based coating

A Comprehensive Study on Microstructure and Wear Behavior of Nano-WC Reinforced Ni60 Laser Coating on 17-4PH Stainless Steel

Microstructure and Wear Properties Under Dry Sliding for Micro-nano WC Composite Coatings Prepared by Laser Cladding

Effect of La2O3 on Wear Resistance of Laser-Cladded Fe-Based Alloy Coatings

Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature

Microstructure and properties of composite coatings by laser cladding Inconel 625 and reinforced WC particles on non-magnetic steel

Experimental Study on the Microstructure and Tribological Properties of Laser-Clad Ni60-WC Composite Coatings

Effects of Cu and WS2 addition on microstructural evolution and tribological properties of self-lubricating anti-wear coatings prepared by laser cladding

Effect of CeO2 Content on Microstructure and Wear Resistance of Laser-Cladded Ni-Based Composite Coating

Study on Melting–Precipitation Evolution of WC in Ni/WC-12Co Coating during Laser Cladding and Tribological Properties

Effect of ingredients proportions on mechanical properties in laser-coated WC-blend welds

High-Speed Laser Cladded Ni-Based WC Coatings: Microstructure, Friction-Wear Property and Wear Mechanism

Microstructure and Sliding Wear Resistance of Laser Cladded WC/Ni Composite Coatings with Different Contents of WC Particle

Effect of La2O3 addition on wear properties of Ni60a/SiC coating using laser-cladding

Microstructure, Mechanical and Tribological Properties of WC-WCoB Coating