Abstract:State-of-the-art Li–S batteries (LSBs) still suffer from a series of technical issues, including rapid capacity fading, due to polysulfide dissolution and shuttling, low active material loading in the cathode, and sluggish reaction kinetics. These challenges can be combatted through the application of efficient sulfur hosts that provide ample void structures, maintain electronic and ionic pathways, and confine soluble polysulfides within the cathode. This work uses sustainable glucose and sodium chloride as the precursors in a "sweet and salty" synthesis method to produce hierarchical porous carbon as the sulfur host for LSB cathodes. The as-prepared hierarchical porous carbon host (HPCH) is shown to have an exceptionally large specific surface area of 1540 m2 g–1 with a favorable pore size distribution due to the unique solvent/porogen system employed during synthesis. The porous matrix can adsorb the polysulfides at the cathode with the hydroxyl and carbonyl groups distributed on the HPCH surface. Systematic electrochemical investigation reveals that the HPCH also possesses both high ionic and electronic conductivity, which allows a reversible capacity of nearly 500 mA h·g–1 to be obtained after 500 cycles at 0.5 C and enhanced performance at high C rates. This work suggests that the as-prepared HPCH could be an excellent material to host other soluble electrode materials in electrochemical storage devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.2c00367.Dispersion of carbon materials in aqueous and ethanoic KOH solutions; N2 adsorption/desorption isotherm, pore size distribution, XRD pattern, and Raman spectra from the CB sample; high-magnification SEM images of S/CB and S/HPCH cathodes; equivalent circuit from EIS analysis; fitting results from EIS analysis; and SEM images and EDS mapping of the high-loading S/CB and S/HPCH cathodes (PDF)This article has not yet been cited by other publications.

Effect of zinc-based active sites on porous carbon and electrochemical properties in lithium-sulfur batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Sustainable “Sweet and Salty” Synthesis of Hierarchical Porous Carbon for Lithium–Sulfur Batteries

In-situ generated sulfur/porous carbon nanocomposites featuring enhanced specific surface area for aqueous zinc-sulfur batteries with small electrochemical polarization

Multifunctional Cu-Cu3p Heterojunction Embedded in Hierarchically Porous Carbon Nanofibers to Strengthen Adsorption and Catalytic Effects Based on Built-In Electric Field for Li-S Cell

Hierarchically structured catalytic and adsorptive ZnS-modified carbon microtubule interlayers for lithium‐sulfur batteries

Porous Carbon Hosts For Lithium-Sulfur Batteries

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

Enhancing Catalytic Conversion of Polysulfides by Hollow Bimetallic Oxide-Based Heterostructure Nanocages for Lithium-Sulfur Batteries

Electrochemical Active Interlayer with Porous Architecture for Reliable Lithium–sulfur Batteries

Free-standing graphene/polyetherimide/ZrO2 porous interlayer to enhance lithium-ion transport and polysulfide interception for lithium-sulfur batteries

Biomass Waste Inspired Highly Porous Carbon for High Performance Lithium/Sulfur Batteries

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Boosting Polysulfide Catalytic Conversion and Facilitating Li+ Transportation by Ion‐Selective COFs Composite Nanowire for LiS Batteries

Hollow and Porous N‐Doped Carbon Framework as Lithium‐Sulfur Battery Interlayer for Accelerating Polysulfide Redox Kinetics

Synergetic effect of block and catalysis on polysulfides by functionalized bilayer modification on the separator for lithium-sulfur batteries

Bio-assisted engineering of hierarchical porous carbon nanofiber host in-situ embedded with iron carbide nanocatalysts toward high-performance Li–S batteries