Abstract:The development of wearable thermoelectric generators (w-TEGs) toward light weight, economy and high power generation performance can provide more opportunities for their application in self-powered wearable electronics. The existing w-TEGs lack insight into the physical parameter coupling between the substrate and TE legs, which leads to inefficient utilization of temperature difference and deterioration of power generation performance. In this work, the comprehensive thermal management for heat collector, TE legs and heat radiator is carried out by finite element simulation. It is found that increasing the thermal conductivity of the substrates for heat collection and dissipation is conducive to reducing the optimal fill factor and substrate thickness, and improving the power density, thus facilitating the w-TEG to be both comfortable to wear, economical, and functional. Specifically, a laminated film with good flexibility prepared from polyimide (PI) film and graphene assembly film (GAF) acts as the substrate of w-TEG. The PI film compensates and enhances the mechanical strength of the laminated substrate; the GAF with large thermal conductivity reduces the in-plane and out-of-plane thermal resistance of the laminated substrate, which contributes to the heat collection of the bottom substrate; and the GAF with high emissivity enhances the radiative heat transfer and facilitates the heat dissipation of the top substrate, which is cut into blocks without affecting the electrical path to ensure overall flexibility of the w-TEG. When the w-TEG with laminated substrate and fill factor of 10% (four w-TEG units connected in series, 20 × 145 mm2 in plane) is worn on the wrist for running (contact pressure: 0 KPa, wind speed: 3 ms-1), the optimal output voltage and power density reach 281.6 mV and 45.6 μWcm-2, respectively, which is one of the best results among the recently reported heatsink-less w-TEGs. This work provides guidance for optimizing the output performance of w-TEG and accelerate the development of self-powered electronics.

No external load measurement strategy for micro thermoelectric generator based on high-performance Si1−x−yGexSny film

Design and Fabrication of Wearable Thermoelectric Generator Device for Heat Harvesting

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Measurement and Analysis for Performance of Micro-thermoelectric Generator

High-Performance Wearable Bi2Te3-Based Thermoelectric Generator

Data Fitting and Analysis of Performance for Micro-thermoelectric Generator

High-performance, thin-film thermoelectric generator with self-healing ability for body-heat harvesting

Wearable Thermoelectric Generator with Copper Foam As the Heat Sink for Body Heat Harvesting

Silicon integrated circuit thermoelectric generators with a high specific power generation capacity

High Power Density Micro Thermoelectric Generators for Powering IoTs

Optimizing the output performance and parasitic depletion of Bi2Te3-based thermoelectric generators by using a high-density approach

Development of MEMS Process Compatible (Bi,Sb)2(Se,Te)3-Based Thin Films for Scalable Fabrication of Planar Micro-Thermoelectric Generators

Optimized thermal design for excellent wearable thermoelectric generator

High performance wearable thermoelectric generators using Ag2Se films with large carrier mobility

Monolithic Carbon Nanotube Film Thermoelectric Generator

Simultaneous Realization of Flexibility and Ultrahigh Normalized Power Density in a Heatsink-Free Thermoelectric Generator via Fine Thermal Regulation

Bi 2 Te 3 -based wearable thermoelectric generator with high power density: from structure design to application

Flexible Bi2Te3/PEDOT nanowire sandwich-like films towards high-performance wearable cross-plane thermoelectric generator and temperature sensor array

Flexible micro thermoelectric generators with high power density and light weight

Exploring Material Properties and Device Output Performance of a Miniaturized Flexible Thermoelectric Generator Using Scalable Synthesis of Bi2Se3 Nanoflakes

High-performance flexible thermoelectric generators with tunable in-plane and out-of-plane architectures