Abstract:The initial mobile formaldehyde concentration, C-m,C-0; the partition coefficient, K; and the diffusion coefficient, D, of a dry building material are key parameters to characterize formaldehyde emissions from the building material. The solvent extraction method and direct thermal desorption method can overestimate C-m,C-0 because of high temperature. A new method has been developed to determine C-m,C-0 under similar conditions to common indoor environment, together with K and D. In the proposed method, the tested materials are placed in an airtight environmental chamber for which the temperature can be controlled by a water bath, then the materials undergo a multisorption/emission process and the instantaneous formaldehyde concentration in the chamber is recorded. The K and C-m,C-0 are determined from the equilibrium concentrations after every sorption by means of the linear least-square regression, and D is obtained by fitting the concentration at the emission stage into a mass-transfer-based model in the literature. Four kinds of wooden medium-density boards are tested. The C-m,C-0 measured using this method is the mobile formaldehyde concentration in the material, which differs significantly from the total formaldehyde concentration in the material measured by using the traditional method recommended by the Chinese standard (GB/T 176S7-1999) extraction method. This means that the mobile formaldehyde takes only a small portion of the total quantity in the tested material. The K, D, and C-m,C-0 values measured using this new method are used to predict formaldehyde concentrations for sorption processes. The results agree well with experimental data. In addition, some factors influencing the accuracy are analyzed.

Henry's law constant and overall mass transfer coefficient for formaldehyde emission from small water pools under simulated indoor environmental conditions

Overall mass transfer coefficient for pollutant emissions from small water pools under simulated indoor environmental conditions

Formaldehyde Removal Performance Analysis of a Liquid Desiccant Dehumidification System

Formaldehyde emissions from a LIFE reference: emission parameters and factorial studies

Computational Fluid Dynamics Prediction of Formaldehyde Emission and Sorption Processes in a Small Test Chamber with Mixing Fan and Vents

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

Standard formaldehyde source for chamber testing of material emissions: model development, experimental evaluation, and impacts of environmental factors.

Development of a Physics-Based Model for Analyzing Formaldehyde Emissions from Building Material under Coupling Effects of Temperature and Humidity

Impact of Temperature on the Ratio of Initial Emittable Concentration to Total Concentration for Formaldehyde in Building Materials: Theoretical Correlation and Validation.

The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations

Refinement and predicting formaldehyde concentrations of indoor fabric: Effects of temperature and humidity

A Novel Method for Measuring the Diffusion, Partition and Convective Mass Transfer Coefficients of Formaldehyde and VOC in Building Materials

USING AN AIRTIGHT CHAMBER TO MEASURE THE PARTITION COEFFICIENT OF FORMALDEHYDE ON TYPICAL ADSORBENTS

Density, excess molar volume, and COSMO-RS study of reactive aqueous solutions containing formaldehyde

A Time-Varying Model for Predicting Formaldehyde Emission Rates in Homes

Henry’s Law Constants and Indoor Partitioning of Microbial Volatile Organic Compounds

The Impact of Relative Humidity on the Emission Behaviour of Formaldehyde in Building Materials

Adsorption of Formaldehyde on the Surface of Environmental Test Chamber

Methods for Estimating Henry′s Law Constants of Volatile Organic Water Pollutants

Comparison of multidimensional mass transfer models of formaldehyde emissions originating from different surfaces of wood-based panels

Variable volume loading method: a convenient and rapid method for measuring the initial emittable concentration and partition coefficient of formaldehyde and other aldehydes in building materials.