Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Flexible Soft X‐Ray Image Sensors based on Metal Halide Perovskites With High Quantum Efficiency (Adv. Mater. 48/2024)

Flexible Soft X‐Ray Image Sensors based on Metal Halide Perovskites With High Quantum Efficiency

Flexible, Printable Soft‐X‐Ray Detectors Based on All‐Inorganic Perovskite Quantum Dots

Wearable Photoferroelectric Perovskite X‐Ray Detectors

Flexible Ultrathin Single-Crystalline Perovskite Photodetector

Lead-free perovskite/ZnO heterostructure for flexible visible-blind ultraviolet photodetection

Metal Halide Perovskite Nanocrystals: Application in High-Performance Photodetectors

Multi-inch single-crystalline perovskite membrane for high-detectivity flexible photosensors

Flexible, active-matrix flat-panel image sensor for low dose X-ray detection enabled by integration of perovskite photodiode and oxide thin film transistor

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Flexible perovskite scintillators and detectors for X-ray detection

Heterointerface Design of Perovskite Single Crystals for High‐Performance X‐ray Imaging

Flexible all-inorganic photoconductor detectors based on perovskite/hole-conducting layer heterostructures

Metal‐Free Halide Perovskite Single Crystals with Very Long Charge Lifetimes for Efficient X‐ray Imaging

Evaporated Perovskite Thick Junctions for X-Ray Detection

Flexible 2D Perovskite Film for Dual-Mode X-Ray Detection and Imaging

Oleic Acid‐Assisted Nucleation Growth of Highly Luminescent CsCu2I3 Single Crystals and Their Films for Flexible and Dynamic High‐Resolution X‐Ray Imaging

Monolithic integration of perovskite heterojunction on TFT backplanes through vapor deposition for sensitive and stable x-ray imaging

High‐Performance Flexible Self‐Powered Photodetectors Utilizing Spontaneous Electron and Hole Separation in Quasi‐2D Halide Perovskites

Molecular Doping of Flexible Lead-Free Perovskite-Polymer Thick Membranes for High-Performance X-Ray Detection

Flexible Indirect X-Ray Detector Enabled by Organic Photodiode and CsPbBr3 Perovskite Quantum Dot Scintillator