Abstract:In recent years, femtosecond (fs)-lasers have evolved into a versatile tool for high precision micromachining of transparent materials because nonlinear absorption in the focus can result in refractive index modifications or material disruptions. However, when high pulse energies or low numerical apertures are required, nonlinear side effects such as self-focusing, filamentation or white light generation can decrease the modification quality. In this paper, we apply simultaneous spatial and temporal focusing (SSTF) to overcome these limitations. The main advantage of SSTF is that the ultrashort pulse is only formed at the focal plane, thereby confining the intensity distribution strongly to the focal volume and suppressing detrimental nonlinear side effects. Thus, we investigate the optical breakdown within a water cell by pump-probe shadowgraphy, comparing conventional focusing and SSTF under equivalent focusing conditions. The plasma formation is well confined for low pulse energies <2 µJ, but higher pulse energies lead to the filamentation and break-up of the disruptions for conventional focusing, thereby decreasing the modification quality. In contrast, plasma induced by SSTF stays well confined to the focal plane, even for high pulse energies up to 8 µJ, preventing extended filaments, side branches or break-up of the disruptions. Furthermore, while conventional focusing leads to broadband supercontinuum generation, only marginal spectral broadening is observed using SSTF. These experimental findings are in excellent agreement with numerical simulations of the nonlinear pulse propagation and interaction processes. Therefore, SSTF appears to be a powerful tool to control the processing of transparent materials, e.g., for precise ophthalmic fs-surgery. Splitting an ultrashort pulse into its constituent colors prior to focusing can result in more precise and better-confined materials processing. Robert Kammel and co-workers used a grating to split a stream of 50 fs pulses from an amplified infrared mode-locked laser into spectrally separated beamlets. This beam was focused in a water cell using a parabolic mirror in order to confirm the effectiveness of the scheme for pulse energies of up to 8 µJ. Numerical simulations and experiments show that this approach strongly confines the intensity to the resulting focal spot and reduces unwanted nonlinear side effects such as self-focusing, filamentation and supercontinuum generation. The researchers say that their work should lead to improvements in the high-precision processing deep inside of transparent materials and could be particularly beneficial for ophthalmic fs surgery.

Decoherent Focusing Design and Advanced Passive Speckle Reduction for Laser Illumination Systems

Smoothing of Small On-Target Spots Produced by Frequency-Tripled Beams Using Lens Array and Spectral Dispersion

Phase-coded Speckle Illumination for Laser Fourier Ptychographic Microscopy

Laser speckle reduction utilized by lens vibration for laser projection applications

Spatial coherence research and passive speckle suppression for edge-emitting broad-area semiconductor lasers

Speckle reduction in laser projection displays through angle and wavelength diversity

Research on the Design of Kepler Refractive Shaping System with the Long Working Focal Depth

Nanolasers with Feedback as Low-Coherence Illumination Sources for Speckle-Free Imaging: A Numerical Analysis of the Superthermal Emission Regime

Study on Speckle Noise Reduction in Laser Projection Displays

A step-by-step guide to reduce spatial coherence of laser light using a rotating ground glass diffuser

Speckle Reduction Using A Motionless Diffractive Optical Element

Zwitterion-doped liquid crystal speckle reducers for immersive displays and vectorial imaging

Effect of laser speckle on light from laser diode-pumped phosphor-converted light sources

Speckle reduction by employing two green lasers and two-dimensional vibration of lenses

On the improvement of smoothing by spectral dispersion efficiency for laser–plasma interaction

Enhancing Precision in Fs-Laser Material Processing by Simultaneous Spatial and Temporal Focusing

Design of Cascaded DOEs for Focusing Different Wavelengths to Different Points

Creating and Controlling Complex Light

Continuous Phase Diffractive Optical Element for Uniform Focal Spot

Laser projection optical path design and speckle suppression

Tri-wavelength blending method for speckle reduction and color space enhancement in laser projection systems