Laser speckle reduction utilized by lens vibration for laser projection applications

Mahmoud Mohamed,M A Qianli,Liam Flannigan,Chang-Qing Xu

DOI: https://doi.org/10.1088/2631-8695/ab42eb

IF: 1.7

2019-09-20

Engineering Research Express

Abstract:In this paper, a compact speckle reduction method utilizing vibrating lenses for laser beam scanningis proposed and demonstrated. The maximum speckle reduction efficiency was found to be 75.6% and81.25% for a 532 nm diode-pumped solid-state (DPSS) laser and a 520 nm laser diode (LD),respectively. The minimum speckle contrast ratio observed using our method was 0.11 for the DPSSlaser and 0.06 for the LD. The proposed method can provide speckle reduction with minimal powerrequirements, a low implementation cost, and no bending for the optical path of the laser beam.Additionally, this method is promising to withstand high-power lasers for use in high lumen laserprojectors by optimizing the lens parameters. The demonstrated technique has a small form factorwhile simultaneously demonstrating a high degree of speckle reduction, which shows potential forspeckle reduction in mini- and pico- laser projector applications.

What problem does this paper attempt to address?

This paper attempts to solve the laser speckle problem in laser projection applications. As a highly coherent light source, when a laser is projected onto a rough surface, it will produce granular bright - and - dark patterns, which are caused by the constructive and destructive interference of the reflected laser beam on the rough surface. These speckles will degrade the image quality, so they need to be suppressed in display - based applications.

### Paper Background
Traditional projectors usually use broadband light sources, such as ultra - high - pressure mercury lamps and xenon lamps. Although these light sources are useful, they have disadvantages such as high power consumption, generating a large amount of heat, and short lifespan. In contrast, as a light source, the laser has a smaller divergence angle, a wider color gamut, higher brightness, and a longer lifespan. However, the main problem with the laser light source is laser speckle, which will affect the image quality.

### Solution
The paper proposes a method of using a vibrating lens to reduce laser speckle. Specifically, by making the lens vibrate in a one - dimensional direction to generate laser scanning, multiple uncorrelated speckle patterns are generated. The superposition of these patterns can reduce the overall speckle contrast ratio (SCR) and improve the image quality.

### Experimental Results
- **Speckle Reduction Efficiency**: For a 532 - nm diode - pumped solid - state laser (DPSS) and a 520 - nm laser diode (LD), the maximum speckle reduction efficiencies are 75.6% and 81.25% respectively.
- **Minimum Speckle Contrast**: The minimum speckle contrasts observed using this method are 0.11 for the DPSS laser and 0.06 for the LD respectively.

### Method Advantages
- **Low Power Consumption**: This method only requires low power requirements.
- **Low Cost**: The implementation cost is low.
- **No Optical Path Bending**: It will not bend the optical path of the laser beam, which is suitable for compact system design.
- **Applicable to High - Power Lasers**: By optimizing the lens parameters, this method can withstand high - power lasers and is suitable for high - lumen laser projectors.

### Conclusion
This paper proposes and verifies a method of using a vibrating lens to reduce laser speckle. By combining a vibrating lens, a diffuser, a light pipe, and a condenser lens, efficient speckle reduction is achieved. Compared with the MEMS scanning mirror, this method provides a better speckle reduction effect while maintaining low power consumption and low cost. Future work will explore the use of LVM modules with two vertical vibration directions to achieve two - dimensional laser scanning and further reduce the speckle contrast.