Abstract:Laser speckle has a negative effect on laser projectors, so reducing laser speckle is crucial for the development of laser projector displays. We primarily focus on studying the laser speckle contrast of laser projector displays and the mechanism for reducing speckle. Based on the theory of decreasing temporal and spatial coherence of laser light, this report derives the complete formula for calculating speckle contrast in a laser projector display and provides detailed calculation procedures. According to the comprehensive formula, the primary factors influencing speckle contrast encompass wavelength, spectrum, angles of incidence or observation of lasers, the roughness of the screen surface, the number of independent speckle patterns generated by a moving diffuser, and the number of resolution elements within one eye resolution element in the projector lens. Various methods have been used in the projection engine to suppress speckle, and the main factors for reducing speckle have been verified through theoretical calculations and experimental verification. At a testing distance of 700 mm and with an F-number of 41.7 for the detector lens, the RGB laser speckle contrasts were measured to be 9.1%, 7.3%, and 10.4%, respectively, which aligns well with the results obtained from theoretical calculations. Meanwhile, the speckle contrast of the white field was also measured, yielding a result of 5.6%. The speckle contrast becomes imperceptible when the viewing distance exceeds 2000 mm in our projection system.
What problem does this paper attempt to address?
This paper attempts to solve the problem of laser speckle noise in laser projection display. Specifically, the author has studied the mechanism of laser speckle contrast in laser projector display and explored methods to reduce speckle. The main objective of the paper is to provide a comprehensive speckle - contrast calculation formula through theoretical analysis and experimental verification, in order to better understand and optimize the performance of laser projection systems.
### Background and Problem Description of the Paper
Laser projection display technology is widely used in various scenarios because of its high contrast, high brightness and wide color gamut. However, when highly coherent lasers are reflected on rough surfaces, speckle noise will be generated, which will affect the quality of the projected image. Therefore, reducing laser speckle is crucial for enhancing the effect of laser projection display.
### Main Research Contents
1. **Theoretical Analysis of Speckle Contrast**:
- Based on the theories of reducing the temporal coherence and spatial coherence of laser light, the author has derived a complete calculation formula for speckle contrast in laser projection display.
- The formula takes into account multiple influencing factors, including wavelength, spectrum, incident angle or viewing angle, roughness of the screen surface, the number of independent speckle patterns generated by the moving diffuser, and the number of resolution elements within one eye - resolution unit in the projection lens.
2. **Speckle Suppression Methods**:
- The author has discussed multiple methods to reduce speckle, such as broadening the spectrum, using multi - wavelength laser modules, using random lasers, using polarization diversity or angular diversity, using moving random diffuser plates, rotating diffraction optical elements or microlens arrays, etc.
- Through theoretical calculation and experimental verification, the author has verified the effectiveness of these methods.
3. **Experimental Verification**:
- The author has designed a projection engine, including a combination system, an illumination system and a projection lens.
- The experimental results show that at a test distance of 700 mm and with a detection lens F - number of 41.7, the speckle contrasts of RGB lasers are 9.1%, 7.3% and 10.4% respectively, which are consistent with the theoretical calculation results.
- When the viewing distance exceeds 2,000 mm, the speckle contrast becomes imperceptible.
### Key Formulas
1. **Complete Formula for Speckle Contrast**:
\[
C=\sqrt{\frac{1}{1 + \frac{2\pi^{2}(\delta v)^{2}(\sigma_{h})^{2}(\cos\theta_{0}+\cos\theta_{i})^{2}}{v^{2}}}\left(\frac{1}{M}+\frac{1}{N}-\frac{1}{MN}\right)}
\]
where:
- \(C\) is the speckle contrast.
- \(v\) is the central frequency of the spectrum.
- \(\delta v\) is the 1/e width of the spectrum.
- \(\sigma_{h}\) is the standard deviation of the surface height distribution.
- \(\lambda\) is the average wavelength of the incident laser.
- \(\theta_{0}\) and \(\theta_{i}\) are the incident angle and the viewing angle respectively.
- \(M\) is the number of resolution elements within one eye - resolution unit in the projection lens.
- \(N\) is the number of statistically independent speckle patterns generated by the moving diffuser.
2. **Number of Statistically Independent Speckle Patterns**:
\[
N = \frac{3\pi^{2}vDT}{8\lambda z}
\]
where:
- \(v\) is the linear velocity of the moving diffuser.
- \(D\) is the effective diameter of the projection lens.
- \(T\) is the time of the moving diffuser.
- \(z\) is the distance from the projection lens to the screen.
### Conclusion
Through theoretical analysis and experimental verification, the author has successfully derived a comprehensive speckle - contrast calculation formula and verified the effectiveness of multiple methods for reducing speckle. These research results provide important theoretical basis and technical support for the optimization of laser projection display systems.