Abstract:Effective online monitoring of the spatial distribution of high-energy radiation is of significant importance in various fields such as medical imaging, high-energy physics, and homeland security. However, achieving radiation detectors with both high sensitivity and minimal disturbance is an enormous challenge. The present study introduces a solution to this bottleneck issue through the development of a full-inorganic scintillating fiber, successfully demonstrating its application in constructing a radiation monitoring device. The scintillating fiber, activated with Ce3+ and fabricated using the melt-in-tube approach, is lightweight with a density of 2.5 g cm-3 and exhibits efficient scintillating emission with a light yield of 4000 photons MeV-1. These characteristics enable the achievement of radiation detection with high sensitivity while keeping disturbance to the incident radiation beam at a minimum. Furthermore, 2D and 3D radiation beam monitors are constructed based on these scintillating fibers, facilitating spatial radiation monitoring. The findings demonstrate that full-inorganic scintillating fibers and devices offer a synergistic combination of high sensitivity and negligible disturbances. This progress not only introduces a novel full-inorganic fiber for radiation detection but also suggests promising applications in various nuclear fields where 3D radiation beam tracking is essential. Scintillating fibers are employed to online monitoring for the spatial distribution of high-energy radiation. The fabrication of full-inorganic scintillating fibers using the melt-in-tube strategy offers significant advantages, including high sensitivity and minimal disturbance to the incident radiation. The application of these scintillating fibers in the construction of 2D and 3D radiation monitors enables precise tracking of spatial radiation beam distribution. image

Beam test results of a fully 3D-printed plastic scintillator particle detector prototype

Additive manufacturing of a 3D-segmented plastic scintillator detector for tracking and calorimetry of elementary particles

Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements

A novel polystyrene-based scintillator production process involving additive manufacturing

Multi‐Photon 3D Laser Micro‐Printed Plastic Scintillators for Applications in Low‐Energy Particle Physics

Additive manufacturing of inorganic scintillator-based particle detectors

3D Printed Ultra‐Fast Plastic Scintillators Based on Perovskite‐Photocurable Polymer Composite

3D-printing of transparent granulate materials for light guides and scintillation detectors

3D Printing of Scintillating Materials

Microstructured plastic scintillators for pencil beam profiling in proton-therapy accelerators

Beam test results of 3D fine-grained scintillator detector prototype for a T2K ND280 neutrino active target

Microstructured Plastic Scintillators For Beam Profiling In Medical Accelerators

Beam Test Studies of 3D Pixel Sensors Irradiated Non-Uniformly for the ATLAS Forward Physics Detector

Study of timing characteristics of a 3 m long plastic scintillator counter using waveform digitizers

Scintillator-SiPM Detector for Tracking and Energy Deposition Measurements

Characterization of a Low-Cost Plastic Fiber Array Detector for Proton Beam Dosimetry

A fast plastic scintillator for low intensity proton beam monitoring

Online Radiation Beam Tracking by Using Full‐Inorganic Scintillating Fibers

A fully active fine grained detector with three readout views

Proof‐of‐principle of 3D‐printed track‐end detectors for dosimetry in proton therapy

3D Printed Tandem X-Ray Detector with Halide Perovskite-Polymer Composite Semiconductor Absorber