Centimeter-level Geometry Reconstruction and Material Identification in 300 GHz Monostatic Sensing

Zitong Fang,Ziming Yu,Chong Han

2024-10-30

Abstract:Terahertz (THz) integrated sensing and communication (ISAC) technology is envisioned to achieve high communication performance alongside advanced sensing abilities. For various applications of ISAC, accurate environment reconstruction including geometry reconstruction and material identification is critical. This paper presents a highly precise geometry reconstruction algorithm and material identification scheme for a monostatic sensing case in a typical indoor scenario. Experiments are conducted in the frequency range from 290 GHz to 310 GHz using a vector network analyzer (VNA)-based channel sounder by co-locating the transmitter and receiver. A joint delay and angle space-alternating generalized expectation-maximization (SAGE)-based algorithm is implemented to estimate multipath component (MPC) parameters and the indoor geometry is reconstructed based on the extracted parameters. Furthermore, a geometry-based method is employed to model and remove the spurious path of the corner, reaching an accuracy of 1.75 cm. Additionally, a material database using THz time-domain spectroscopy (THz-TDS) is established, capturing reflection losses of over 200 common material samples. Applying this database to our monostatic sensing, the measured reflection losses of wall and window frame are accurately identified as cement and steel, respectively. Our results demonstrate the centimeter-level geometry reconstruction and accurate material identification for practical THz ISAC scenarios, which unleash unprecedented sensing potential compared to microwave and millimeter-wave bands.

Information Theory,Signal Processing

What problem does this paper attempt to address?

The problems that this paper attempts to solve are: in the terahertz (THz) integrated sensing and communication (ISAC) system, to achieve geometric reconstruction with centimeter - level precision and material identification. Specifically, the paper focuses on the following two key issues:

1. **High - precision geometric reconstruction**:
- In an indoor scenario, how to conduct single - station (monostatic) sensing experiments and use a vector network analyzer (VNA) in the 290 GHz to 310 GHz frequency band for channel measurement in order to achieve environmental geometric reconstruction with centimeter - level precision.
- How to estimate multipath component (MPC) parameters through the joint delay - and - angle space - alternating generalized expectation - maximization (SAGE) algorithm and reconstruct the indoor geometric structure based on these parameters.
- How to remove spurious paths caused by the antenna radiation pattern through geometric modeling, thereby improving the reconstruction precision in corner areas.

2. **Material identification**:
- How to use terahertz - time - domain spectroscopy (THz - TDS) to establish a reflection - loss database containing more than 200 common material samples.
- How to compare the measured reflection loss with the data in the database to accurately identify the material components (such as cement and steel) of objects such as walls and window frames.

### Main methods and techniques

- **Geometric reconstruction**:
- Use a VNA to conduct channel measurement and obtain the channel impulse response (CIR) in the 290 GHz to 310 GHz frequency band.
- Adopt the joint delay - and - angle SAGE algorithm to estimate MPC parameters, including delay, angle, and path gain.
- Remove spurious paths at corners through geometric modeling to improve the precision of geometric reconstruction.

- **Material identification**:
- Use THz - TDS to measure the reflection loss of different materials and establish a material database.
- According to the measured reflection loss, match the closest material from the database to achieve material identification.

### Experimental results

- The mean distance error (MDE) of geometric reconstruction is 1.75 cm, and the root - mean - square error (RMSE) is 2.53 cm, achieving centimeter - level precision.
- In terms of material identification, the materials of the wall and window frame are successfully identified as cement and steel respectively, verifying the effectiveness of the system.

Through the above methods, this paper demonstrates the potential for achieving high - precision environmental geometric reconstruction and material identification in the THz ISAC system. Compared with the microwave and millimeter - wave frequency bands, the THz frequency band provides higher resolution and more accurate sensing capabilities.